Operation Manual

English – 24 | MP-4000
5. After finishing the conversion you see the message:
6. Click "OK". To leave the converter program you have to click on
7. The successfully converted AVI video file can be played.
Firmware upgrade
1. Please, keep up with new firmware released on our website at
www.teac.de.
2. Download an updated firmware file from the TEAC website and
unzip the file if the file format is zip file.
3. Turn on the player and connect it to the USB port of your
computer and then a removable disk will appear. Copy the
firmware file to Root Folder of the player.
4. Safety remove the removable disk and pull the player off the USB
port.
5. Upgrading begins by reboot the player.
Caution!
z While Firmware updating, turning the power off may cause a
serious damage and malfunction of the player.
z Do not update with file for different model. It may result of
malfunction to the player.
z Check the current firmware version of your player. Firmware
upgrade will be implemented only for higher version of
firmware.
z When you make a firmware upgrade, make sure the battery
has been charged enough.
z The remaining battery must be over one-third of battery full.