Owner's Manual
Playing records
i·
iMMH~i
Do
not
vibrate the unit during playback. Doing
so
could
cause
the sound to skip and damage the record and stylus.
n Press
the
STANDBY/ON
button
on
the
back
of
the unit
to
turn it on.
lj
~
=ON
.O.STANDB
Y
fl
Open the dust cover slowly.
&
Be
careful not
to
pinch your fingers, for
example, when opening and closing the
dustcover.
n
Place
a record on the platter.
When playing a
45
RPM
large-hole single record,
use
the
included adapter.
Basic operation
!]
Select
the
rotation speed indicated on
the record.
The rotation speed
can
be
set
to
33
1 /3,
45
or
78
RPM
n Move the tonearm clasp to
the
right
to
release the tonearm.
Clasp
rlt
Push
the tonearm lifter lever toward the
back (up position).
•
You
can
also move the tonearm above the record
when the tonearm lifter lever
is
in
the down position
Slowly lower it
to
start playback.
IJ
Move
the
tonearm
to
the
track where
you want to start playback.
• Always remove the protective cover (white) before
use.
Keep
this protective cover
to
protect the
tip
of
the stylus during transportation .
• The first song starts at the outer edge
of
the record.
Lower the stylus
to
the outer edge
of
the record if
you want to listen to the first song.
1\1
Use
the tonearm lifter lever
to
lower the
tonearm.
The tonearm lowers slowly until the stylus touches the
record and playback begins
• Close the dust cover during playback. Since
doing
this prevents skipping caused by unintended contact
and blocks external sound pressure, it makes noise
less
likely
to
occur.
& Do not place anything on
the
dust cover.
;.;;ww-n;
• During playback, do
not
touch the tonearm
or
the rotating
record. Doing
so
could damage the stylus
tip
and cause
scratches on the record
• Do
not
forcibly stop platter rotation during playback.
Since
this
product
is
not
a turntable designed for
DJs
(direct
drive), doing something like this could cause malfunction.
If the volume
is
too loud during record playback, vibration
from speakers could
be
transmitted
to
the stylus, causing
loud feedback.
If
this happens, lower the volume
of
the
amplifier.
When playback finishes
When playback finishes, the tonearm automatically returns
to
the tonearm holder and the rotation
stops.
To
manually interrupt playback,
use
the tonearm lifter lever
to
raise
the tonearm and then return the tonearm
to
its
resting
position.
Tonearm lifter lever
t1o!-,,-~!+--
- Tonearm
f~>~dshell
•
The
tonearm may
not
return
to
the tonearm holder auto-
matically depending on the record.
In
that
case,
move the
tonearm back to the tonearm holder manually.
7
I