OPTN3BXTEA06 Z SKAT I G 0 I– 3 T N AN OWNER’S MANUAL 사용자 설명서 한국어 ANALOG TURNTABLE ENGLISH TN-3B-SE
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. After reading it, keep it in a safe place for future reference. Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handling records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparing the record player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the record player 7 Install the counterweight. 1 Cushions are attached to the tonearm Motor pulley release the tonearm. T SKAT I– 0 Flat belt I G AN oo When the counterweight can be moved toward the bearing, installation is complete. N for use during transportation. Remove them in the directions of the arrows. Place the counterweight over the end of the tonearm, and press it gently as you turn it right to attach it.
Connections 8 Turn the counterweight so that the D DC input connector After completing all other connections, connect the included AC adapter to this connector. Confirm that the power plug of the AC adapter is plugged into a power outlet. oo The tracking force of the included cartridge is 2.0 g. So, turn it to 2 on the counterweight scale when using the included cartridge. oo Do not use any AC adapter other than the one included. Connect to line input connectors of amplifier, etc.
Dust cover Attaching the dust cover Names and functions of parts Opening and closing the dust cover I G AN SKAT I– 3 0 T N Dust cover Open Main unit Basic operation a b Playing records c oo Remove the protective cap from the cartridge stylus before using the turntable. d e f g 1 Press the STANDBY/ON button on the back of the unit to turn it on. Hinge h i Opening 1 Insert the hinges completely into the hinge holders at the left and right ends of the back of the main unit.
Notes about record styluses 4 Select the rotation speed indicated on the record. 7 Move the tonearm to the track where you want to start playback. The rotation speed can be set to 33 1/3 or 45 RPM. When playback finishes 1 Raise the tonearm lifter lever to separate Replacing the stylus 3 AN 0 release the tonearm. I G 5 Move the tonearm clasp to the right to SKAT I– N T 8 Lower the tonearm lifter lever.
Changing the cartridge To change the cartridge, first remove the headshell from the tonearm. oo An Audio-Technica AT-VM95E VM Type cartridge is installed in this unit. NOTE VM type cartridges have the same characteristics as MM type cartridges. oo We recommend that you attach the protective cap to the cartridge stylus before doing this task. Headshell Troubleshooting 4 Connect the shell lead terminals to the cartridge. oo The signals and colors of the shell leads are shown below.
Specifications Output voltage Included items Drive system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Belt drive Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC motor Rotation speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 1/3 rpm, 45 rpm Wow and flutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1% or less SN ratio . . . . . . . . . . . . . . .
WARRANTY This warranty gives you specific legal rights, and you may also have other rights that vary by country, state or province. If you have a warranty claim or request, please contact the dealer where you bought the product. Z Japan: TEAC CORPORATION 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan https://teac.jp/int/ This product has a serial number located on the rear panel. Please write it here and retain this for your records.
Gpe Microsystems Instruction Manual G Series Interchangeable AC Plug Models 1. Pull back tab and hold. 2. Mate round corner of plug to round corner of receptacle. 3. Insert plug into adapter receptacle head-first until it sits completely inside, then release tab to lock in place. Head (RoulJd Corner) ~◄ ~ US plug Tail Adapter Receptacle UK plug CAUTION: ELECTRIC SHOCK DO NOT INSERT PLUG ALONE TO ELECTRICAL OUTLET. All plugs may not be included. © Gpe Microsystems Corp.
