User Manual

14
:: Shocks Build - Bag J - JJ - Step 2
:: Shocks Build - Bag J - JJ - Step 1
#1105
green slime
91448
Shock
eyelet
91448
Shock
Pivot Ball
91481
12x27.5mm V2
Shock Bodies
(front)
91483
12x36mm V2
Shock Bodies
(rear)
91491
V2 Shock
Hat Bushing
91491
V2 Shock
Spacer
5407
O-Ring
31327
VCS3 Shock
Bottom Cap
31327
VCS3 Shock
Bottom Cap
O-Ring
91491
12mm
Shock Cap
O-Ring
x2
x2
#1105
green slime
Lightly rub shock oil
on the o-ring before
installation!
Racers Tip:
Coating the o-rings
with green slime
(#1105) helps seal
& reduce o-ring
swell! Green slime
not included in kit!
:: Turnbuckles Build - Bag I - Step 3
!
91308
12mm
Shock Piston
(1.5 front)
(1.6 rear)
91489
27.5 x 3
Shock Shaft
(front)
91490
35 x 3
Shock Shaft
(rear)
6299
1/8 E-Clip
6299
1/8 E-Clip
4187
Nylon Spacer,
(.030)
Racers Tip:
Use a marker over the
numbers on the pistons to
make them easily visible!
Front:
2 spacers
Rear:
1 spacers
Build x2 (right and left side)
Rear Camber Turnbuckle
46.00mm
91453
HD Ball Cup
91453
HD Ball Cup
7253
Turnbuckle,
2.62”
Racers Tip:
Use black grease
(#6588) on the
threads of the
turnbuckles for
easier ball cup
installation!
Orient the notch
to the left throughout the
car. It indicates which end
has the left hand threads!
!
Install the ballstuds on
curved side of the ball cup!
!