:: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
:: Hardware - 1:1 Scale View Flat Head (fhcs) Cap Head (shcs) 2.5x10mm (31350) Flat Head (fhst) 2.5x12mm (8691) Set Screws 3x2.5mm (31500) 2.6x8mm (21546) 3x3mm (25225) 2.6x10mm (21546) 3x8mm (4670) 2.5x6mm (31520) Button Head (bhst) 2.6x6mm (21546) 2.6x8mm (21546) 2.6x10mm (21546) 4x7x2.5mm (21512) 4x8x3mm (21512) 2x8mm (21546) Button Head (bhcs) Notes: Ball Bearings Nuts (lock/plain) M2.
:: Quick Start Guide Battery Charging Steps and Safety: Remove the battery from the vehicle before charging. Place battery on a fire resistant surface. Avoid any contact with water or other liquids. Be sure to select the correct charging mode for the type of battery you are charging. ALWAYS use a compatible charger for charging your batteries. Caution: Never leave the battery unattended while charging. Always disconnect the charger from the power source when finished charging.
7/18 :: Quick Start Guide - (cont.) Radio System Tuning and Controls: RULE: Transmitter on First/Vehicle on Second, Vehicle off First/ Transmitter off Last! 1) 2) 3) 4) Slide the battery cover to remove cover. Install alkaline or rechargeable AA size batteries into the battery holder. Slide the battery cover back into place making sure it is completely closed and secure. Turn the power ON. If the power indicator LED fails to light, check the batteries for insufficient contact or incorrect polarity.
:: Step 1 21516 Washer 4x8x0.5mm 21530 O-Ring 3.8 x 1mm 21516 Washer 4x8x0.5mm 21530 O-Ring 3.8 x 1mm 21529 Diff case 21529 Diff sun gear 21529 Diff cap 21524 Diff outdrive 21516 Pin 1.5 x 6mm 21524 Diff outdrive :: Step 2 21529 Diff sun gear 21529 Diff cross pin 21516 Pin 1.5 x 6mm 21529 x3 Diff planetary gear #6588 black grease :: Step 3 21546 x3 M2x8mm FHST 21512 x2 8x12x3.
:: Step 4 21516 Washer 4x8x0.5mm 21516 Washer 4x8x0.5mm 21530 O-Ring 3.8 x 1mm 21530 O-Ring 3.8 x 1mm 21529 Diff case 21529 Diff sun gear 21516 Pin 1.5 x 6mm 21529 Diff cap 21524 Center diff shaft 21524 Diff outdrive :: Step 5 21529 Diff sun gear 21516 Pin 1.5 x 6mm 21529 Diff cross pin #6588 black grease 21529 x3 Diff planetary gear :: Step 6 21512 4x8x3mm bearing 21526 Pinion gear (15T) 21512 8x12x3.5mm bearing 21546 x3 M2x8mm FHST 21512 8x12x3.5mm bearing 21516 Pin 1.
:: Step 7 ! Top of set screw head should be flush with the top of the chassis 4670 x4 3x8mm set screw 21500 Chassis :: Step 8 21524 Center diff outdrive 21526 Pinion gear (15T) 21512 x2 4x8x3mm bearing 21516 Pin 1.5 x 6mm :: Step 9 21520 Drive shaft 21504 Drive shaft cover 21546 x10 M2.
:: Step 10 89215 x2 M2.5 locknut 21509 Steering rack 21512 x4 4x7x2.5mm bearing 21509 x2 Hat bushing 21546 x2 M2.6x8mm BHST 21510 x2 Steering post 21522 x2 Ball stud 12.5mm 21505 Steering bellcrank (left) 21505 Steering bellcrank (right) :: Step 11 14B 21546 x3 M2.6x8mm BHST 21504 Body mount, front (14B) 31350 x2 M2.5x10mm FHCS 14T 31520 x2 M2.5x6mm BHCS 21504 Body mount, front (14T) 21504 Top plate 21546 x3 M2.6x8mm BHST 31520 x2 M2.5x6mm BHCS 21504 Top plate 21546 x2 Washer 2.7x0.
:: Step 13 21546 x2 M2.6x10mm BHST 21503 Shock tower, front 21505 Shock tower support, rear 21546 x4 M2.6x8mm BHST 21522 x2 Ball stud 12.5mm :: Step 14 21503 x2 Wing mounts (right, left) 21503 Shock tower, rear 21546 x2 M2.6x8mm BHST 21503 Wing mount brace 21522 x2 Ball stud 12.5mm 21546 x4 M2.6x8mm BHST :: Step 15 21502 x2 Front arms 21511 x2 Inner hinge pin, 3x47mm 21546 x4 M2.
:: Step 16 21501 Skid plate, front 21546 x2 M2.6x6mm BHST 21546 x6 M2.5x10mm FHST :: Step 17 21522 x2 Ball stud 12.5mm 21517 Universal drive shaft 21507 Steering block, left 21507 Caster block, left 21523 x2 Caster block bushings 21546 x2 M2.6x8mm BHST 21521 Crush tube 21512 x2 4x8x3mm bearing Build left and right sides! :: Step 18 21516 Pin 1.
:: Step 19 21502 x2 Rear arms 21501 Arm mount, C 21511 x2 Inner hinge pin, 3x47mm 21501 x2 Arm mount bushing 21502 x2 Rear arm spacers 21501 Arm mount, D 21546 x2 M2.6x6mm BHST :: Step 20 21522 Ball stud 12.5mm 21518 Dog bone axle 21508 Washer, thin 21521 Crush tube 21501 Skid plate, rear 21507 Rear hub, right 21546 x6 M2.5x10mm FHST 21512 x2 4x8x3mm bearing :: Step 21 21518 Rear dog bone 21516 Pin 1.
:: Step 22 21514 x2 Ball Cup ! 21513 M3x35mm turnbuckle Orient the flange to the left throughout the car. It indicates which end has the left hand threads! Front Camber Turnbuckle 20.00mm Build x2 (right and left side) :: Step 23 21514 x2 Ball Cup ! 21513 M3x35mm turnbuckle Steering Turnbuckle 19.50mm Orient the flange to the left throughout the car.
:: Step 25 21538 x2 E-clip 21536 Shock cap 21537 Shock piston 21534 Shock body, front (short) 21535 Shock shaft, front (3x37mm) 21535 Shock shaft, rear (3x43mm) 21530 Shock o-ring 21536 Bottom shock cap 21534 Shock body, rear (long) 21537 Seal spacer 21530 Shock cap o-ring ck sho d flui Front Shock Fluid: 30wt #5422 21537 Shock end Rear Shock Fluid: 30wt #5422 21537 Shock pivot ball :: Step 26 ! ! Leave a gap when installing the shock cap. Compress shock shaft half way.
:: Step 28 21522 Ball stud 12.5mm 21522 Ball stud 12.5mm 8691 M2.5x12mm SHCS 8691 M2.5x12mm SHCS Build x2 (right and left side) :: Step 29 21546 x6 M2.6x10mm BHST, silver 21504 Center diff cap 31520 x2 M2.5x6mm BHCS 21531 Motor mount insert 21532 Pinion gear, 16T 31500 M3x2.5mm set screw 21531 Motor mount cam :: Step 30 Set The Gear Mesh: To set the gear mesh, push the teeth of the motor mount cam #21531 into the corresponding tooth pattern of the motor mount insert.
:: Step 31 21546 M2.6x8mm BHST 21514 x2 Steering link ball Cup 21513 Steering link rod 21505 Servo saver Steering Link 17.40mm 21522 Pivot ball 21546 M2x8mm FHST :: Step 32 21546 x4 M2.6x8mm BHST 21546 x4 Washer 2.7x0.
:: Step 34 21547 1:14 mini pin tire, narrow 21550 1:14 mini pin tire, wide 14B 21551 1:14 wheel, wide (black) 21549 1:14 wheel, narrow (black) 14B: x2 narrow front wheel/tires 14B: x2 wide rear wheel/tires 91738 x2 M4 serrated nuts, black Install x2 narrow front wheel/tires Install x2 wide rear wheel/tires :: Step 35 14T 21545 Wing 21173 x2 Body clips 21503 x2 Wing washer 91738 x2 M4 serrated nuts, black 14T: x4 wide rear wheel/tires :: Step 36 21173 x2 Body clips 21546 M2.
:: Tuning Tips Tips for Beginners: Before making any changes to the standard setup, make sure you can get around the track without crashing. Changes to your vehicle will not be beneficial if you can’t stay on the track. Your goal is consistent laps. Once you can get around the track consistently, start tuning your vehicle. Make only ONE adjustment at a time, testing it before making another change.
:: Shocks 21530 21533 21534 21535 21536 21537 21538 :: Gear Differentials 1:14 Diff & Shock O-rings Set Shock Springs, 2.25 lb in, L40.5mm 1:14 Shock Body Set 1:14 Fr & Rr Shock Shafts 1:14 Shock Caps & Collars 1:14 Shock Accessories Kit 1:14 Shock Piston E-Clip 21536 1 2 2 ea. 2 ea. 4 ea.
:: Transmission 21504 21505 21509 21510 21512 21522 21546 31350 31520 89215 1:14 Upper Plastics Set 1:14 Steering, Battery, Esc Parts Set 1:14 Steering Plate 1:14 Steering Posts 1:14 Bearing Set 1:14 Ball Studs Set 1:14 Hardware Set M2.5x10mm FHCS M2.5x6mm BHCS M2.
:: Turnbuckles and Servo Mounts 21505 21506 21513 21514 21522 21546 1:14 1:14 1:14 1:14 1:14 1:14 Steering, Battery, Esc Parts Set Servo Saver Spring Turnbuckle Set Turnbuckle Rod End Set Ball Studs Set Hardware Set 1 1 1 1 1 1 21546 21546 21546 21505 21546 21546 21505 21522 21505 21546 21506 21514 21546 21514 21513 21505 21546 21514 21514 21546 21513 :: Battery Strap 21173 21505 21546 Body Clips 1:14 Steering, Battery, Esc Parts Set 1:14 Hardware Set 12 1 1 21173 21505 21173 21
:: Front Shock Tower 21503 21522 21546 1:14 F/R Shock Towers & Wing Mounts 1:14 Ball Studs Set 1:14 Hardware Set 1 1 1 21503 21522 21522 21522 21546 21522 21546 21546 21546 :: Rear Shock Tower 21173 21503 21505 21522 21545 21546 Body Clips 1:14 F/R Shock Towers & Wing Mounts 1:14 Steering, Battery, Esc Parts Set 1:14 Ball Studs Set 14B/T Wing 1:14 Hardware Set 12 1 1 1 1 1 21173 21503 21545 21546 21546 21546 21503 21546 21503 21546 21522 21546 21503 21546 21503 21522 21522 21546 21546
:: Front Arm 8691 21502 21507 21508 21511 21512 21516 21517 21521 21522 21523 21546 25225 91738 M2.5x12mm SHCS 1:14 F/R Arms & Spacers 1:14 Rear Hubs, Caster Blocks & Inserts 1:14 Steering Blocks & Wheel Hex Set 1:14 Hinge Pin Set 1:14 Bearing Set 1:14 Drive Pins Set 1:14 Universal Driveshafts 1:14 Fr & Rr Crush Tubes 1:14 Ball Studs Set 1:14 Caster Block Bushings 1:14 Hardware Set M3x3mm Set Screw M4 Serrated Nuts 10 Pr.
:: Front Bulkhead / Steering 21501 21546 1:14 Skid Plates & Arm Mounts 1:14 Hardware Set 1 1 21501 21501 21501 21501 21546 21501 21501 21501 21546 21546 21501 21501 21546 21501 21546 21546 21501 21546 21546 :: Chassis 4670 21500 21504 21505 21546 M3x8mm Set Screw 1:14 Chassis 1:14 Upper Plastics Set 1:14 Steering, Battery, Esc Parts Set 1:14 Hardware Set 10 1 1 1 1 21546 21546 21505 21546 21504 21546 21546 21546 21504 4670 4670 21505 4670 4670 21500
:: Reedy Electronics 302 904 27131 27202 27330 27331 29188 AA Alkaline 1.5V (4) 280-SL4 4500kV Sensorless Brushless Motor D115F Servo 123-S AC LiPo Compact Balance Charger Wolfpack HV LiPo 30C 2100mAh 7.6V Stick Wolfpack LiPo 1600mAh 30C 7.4V w/T-plug SC300-BL Brushless ESC :: Lubes & Adhesives / Decals / Misc.
