:: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RTR. Please take a moment to read through this manual to help familiarize yourself with these steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets.
:: Hardware - 1:1 Scale View Flat Head Screws (fhcs) Socket Head Screws (shcs) 2.5x10mm (31350) 2x5mm (31511) 2.5x14mm (41077) 2x8mm (7187) 3x6mm (31541) 2.5x6mm (41079) Shims and Washers 3x7mmx1mm (42260) 3x7mmx2mm (42260) 2.5x10mm (41087) 3x8mm (25201) 3x7x3mm (42260) 2.5x14mm (71032) 3x10mm (25202) 2.5x16mm (41086) 3x12mm (25203) 3x7x5mm (42260) 3x6mm (41089) 3x14mm (89208) 3x7x7mm (42260) Button Head Screws (bhcs) 2x3mm (31509) 2.
:: Table of Contents 1................... Cover 9 - 12...........Front / Rear Suspension Build 2................... Introduction 12 - 13........Chasssis Build 3...................1:1 Hardware “Fold Out” 14 - 16........Electronics Build 4................... Table of Contents 16 - 19.........Tires and Body Build 5 - 7..............Quick Start Guide 20 - 21........Hoonigan 8....................Shock Build 22................ Back Cover 9....................
1/22 :: Quick Start Guide Battery Charging Steps and Safety: Remove the battery from the vehicle before charging. Place battery on a fire resistant surface. Avoid any contact with water or other liquids. Be sure to select the correct charging mode for the type of battery you are charging. ALWAYS use a compatible charger for charging your batteries. Caution: Never leave the battery unattended while charging. Always disconnect the charger from the power source when finished charging.
:: Quick Start Guide - (cont.) Battery Notes and Tip: Connect the battery as shown. Disconnect the battery when not in use! LiPo: LiPo batteries (lithium polymer) are high current rechargeable batteries. LiPo batteries offer extended run time and peak performance over NiMH batteries. They require a peak detection charger designed specifically for LiPo batteries. These batteries require special care and handling.
:: Quick Start Guide - (cont.) Radio System Tuning and Controls: DO NOT hold the trigger when turning on the radio. If using optional battery for transmitter, be sure to plug it in correctly. Plugging in a battery backwards can cause damage. Refer to Radio owners manual for more in-depth instructions on radio operation and functions. Adjust steering trim so front wheels point straight. Push trigger for Brake Pull trigger for Throttle Neutral Throttle set to Neutral! :: Quick Start Guide - (cont.
:: Shocks Build - Step 1 Build 4 31865 Shock Piston 31866 Shock Body 5407 x2 Red O-Ring 31874 6299 x2 E-Clips 31865 O-Ring Shock Shaft 31864 Shock Bottom Cap 31865 O-Ring Spacer :: Shocks Build - Step 2 id flu ck 22 o 4 Sh #5 31864 Shock Cap (Molded) Sh oc #5 k flu 42 id 2 Shock Bleeding Steps: 1. 2. 3. Front/Rear Shock: 30wt 4. 5. 6. 7. 8. 9. 10. 11. 12. Step 1-3 Step 3-4 Step 5-6 Step 7 Pull shock shaft down. Fill shock body 3/4 full with silicone fluid.
:: Gear Diff Build - Step 1 Build 2 92143 Diff Shim 31859 Diff Case 92132 Sun Gear 31887 10 x 15 x 4 Ball Bearing 31872 Diff Pin 2x9mm 91563 x2 10 x 15 x 4 Ball Bearing 92133 x2 Diff O-Ring 31884 Gear Diff Outdrive :: Gear Diff Build - Step 2 31860 Gear Diff Cross Pin 31350 x4 2.
:: Front / Rear Suspension Build - Step 4 31885 Pinion Shaft, Rear Save for Rear Gearbox 31870 E-Clip 91560 x2 5 x 10 x 4 Ball Bearing 6299 E-Clip 31887 Input Pinion Gear :: Front / Rear Suspension Build - Step 5 Build 2 25202 x4 3 x 10mm FHCS 42041 x2 Pivot Ball 31854 x2 Suspension Arm, Lower 31850 Gear Box, Bottom 31886 x2 Hinge Pin, Lower Build 2 - 1 Front, 1 Rear 25211 x4 3 x 10mm BHCS 31850 Gearbox Top 31850 x2 Arm Mount, Lower ! Build 1 Front and 1 Rear :: Front / Rear Suspension Build
:: Front / Rear Suspension Build - Step 7 Build 4 31522 x2 2.
:: Front / Rear Suspension Build - Step 10 Build Front Build Rear 21173 x2 Body Clip Small 31857 Rear Shock Tower Cap 2308 3 x 18mm BHCS 31855 x2 Body Pivot 31855 x2 Body Post Rear 31877 Shock Tower 25187 3 x 14mm BHCS 31532 3 x 8mm BHCS 89203 x2 3 x 16mm BHCS :: Front / Rear Suspension Build - Step 11 42260 x2 31886 x2 Build Rear Shim 2mm Hinge Pin, Upper 2308 3 x 18mm BHCS 25187 3 x 14mm BHCS 2308 x2 3 x 18mm BHCS :: Chassis Build - Step 1 31857 x2 SIde Guards 31856 Spine Plate 31851 x2 S
:: Chassis Build - Step 2 31851 x2 Steering Bellcrank 91568 x4 4x8x3 Ball Bearing 25187 x2 3 x 14mm BHCS 25203 x2 3 x 12mm FHCS :: Chassis Build - Step 3 21173 x2 Body Clip Small 31862 Front Bumper Top Plate 25202 3 x 10mm FHCS 25203 x3 3 x 12mm FHCS 31855 x2 Body Pivot 31855 x2 Body Post Front 31862 Front Bumper 31862 Front Bumper Mount :: Chassis Build - Step 4 31862 Rear Bumper 25202 x3 3 x 10mm FHCS 31541 x2 3 x 6mm FHCS 25203 x5 3 x 12mm FHCS
:: Electronics Build - Step 1 71050 x2 Hook and Loop 31856 Receiver Grommet 31851 ESC Plate 25211 x2 3 x 10mm BHCS 31856 Battery Foam 31856 Receiver and Battery Tray 31851 x2 Servo Mount 25201 x4 3 x 8mm FHCS 41090 x4 3 x 10mm LP SHCS :: Electronics Build - Step 2 42070 x2 3 x 10mm Shoulder Screw 89202 3 x 12mm BHCS 2308 3 x 18mm BHCS 42041 x2 Pivot Ball 31851 Steering Rack 42215 Servo Horn 31532 3 x 8mm BHCS 25203 x2 3 x 12mm FHCS 31861 Servo Link :: Electronics Build - Step 3 31541 3 x 6m
:: Electronics Build - Step 4 91563 x2 10 x 15 x 4 Ball Bearing 31880 Center Spool 31532 x4 3 x 8mm BHCS 92149 Spur Gear 72T, 48P 25215 x2 M3 Locknut 31858 Center Gear Box Case, Bottom :: Electronics Build - Step 5 25211 x6 3 x 10mm BHCS 31858 Center Gear Box Case, Top 31859 x3 Outdrive, Center 31885 Drive Shaft, Center 5407 x2 Red O-Ring 25204 x2 3 x 16mm FHCS :: Electronics Build - Step 6 42022 x3 4 x 12mm SHCS 25202 x6 3 x 10mm FHCS
:: Electronics Build - Step 7 25202 x2 3 x 10mm FHCS 25189 x2 3 x 22mm BHCS 89210 x2 3 x 20mm FHCS 31858 Top Plate Front 31858 Top Plate Rear 89210 x2 3 x 20mm FHCS 25204 x2 3 x 16mm FHCS 25215 x2 M3 Locknut :: Electronics Build - Step 8 6338 Antenna 25225 3 x 3mm Set Screw Battery ESC 31531 x4 3 x 6mm BHCS 31856 Receiver Box, Top Receiver 6727 Servo Tape 6727 Servo Tape :: Tires and Body Build - Step 1 Build 4 31893 Tire 31893 Insert 31893 Wheel 25391 x2 M4 Flanged Locknut
:: Tires and Body Build - Step 2 31890 Body, RTR 31891 Body, Clear 31892 Front Grill 31892 Turbos :: Tires and Body Build - Step 3 31892 Engine Intake
:: Tires and Body Build - Step 4 31892 Rear Cage 31892 Rear Wing :: Tires and Body Build - Step 5 31891 Front Side Panel 31892 Running Boards
:: Tires and Body Build - Step 6 31891 Rear Side Panel 31892 Side Exhaust :: Tires and Body Build - Step 7 21173 x4 Body Clips 31892 Side Mirror
