ASC70007 SC6.1 Short Course Truck Manual

ManualsBrandsTeam Associated ManualsCars & TrucksRC10 SC6.1 Off Road 1/10 Short Course Team Truck Kit

Summary of content (34 pages)

PAGE 1
PAGE 2
:: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new vehicle. Please take a moment to read through the manual and familiarize yourself with the steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
PAGE 3
:: Hardware - 1:1 Scale View Button Head (bhcs) Flat Head (fhcs) Ball Bearings 2x4mm (31510) Aluminum (8545) 2.5x6mm (31520) 2.5x8mm (31521) 2.5x10mm (31522) 3x4mm (91158) 3x5mm (31530) 3x6mm (31531) Aluminum (8550) Titanium (91580) 3x10mm (25202) Aluminum (8555) Titanium (91593) 5x10x4mm (91560) 3x12mm (25203) Aluminum (8556) Titanium (91594) 6x13x5 (91562) Set Screws 3x2.5mm (31500) 3x3mm (25225) 3x10mm (4671) Shims and Washers 3x18mm (2308) 5.5x0.
PAGE 4
:: Table of Contents 1................... Cover 13 - 14........Bag 7 2................... Introduction 14 - 15........Bag 8 3...................1:1 Hardware “Fold Out” 15 - 17........ Bag 9 4................... Table of Contents 17 - 19........Bag 10 5....................Bag 1 19.................Rear Shock Mounting Option 5 - 8..............Bag 2 20 - 22....... Tuning Tips 8 - 9..............Bag 3 23 - 31....... Catalog 9....................Bag 4 32................
PAGE 5
3/18 :: Bag 1 - Step 1 31383 x2 FT Ballstud Washer, Aluminum (2mm) ! Front 91475 x4 3x7x3 Ball Bearing TOP 91667 Steering Bellcrank (Right) Note orientation of steering rack. 91667 Steering Rack 91048 x2 Heavy-duty Ballstud, 8mm 31382 x2 FT Ballstud Washer, Aluminum (1mm) 91475 x4 3x7x3 Ball Bearing 91667 Steering Bellcrank (Left) :: Bag 1 - Step 2 91678 x2 M3 x 20mm BHCS Shouldered ! The steering bellcrank brace has offsets on one side. They should be installed towards the bearings.
PAGE 6
:: Bag 2 - Step 2 ! 71121 x2 Side Rails SC6.1 (L & R) 31532 x4 M3 x 8mm BHCS 91734 Battery Foam, B6 71124 x2 Nerf Bars (L & R) #91734 Battery Foam There are two thickness options to accomodate battery size. 25202 x4 M3 x 10mm FHCS 25201 x8 M3 x 8mm FHCS :: Bag 2 - Step 3 31382 91820 x2 FT Ballstud Steering Link, B6.1 Washer, Aluminum (1mm) Servo not included! 31284 8mm Ball Stud, Long 4671 M3x10mm Set Screw ! 31532 M3 x 8mm BHCS Tighten the steering link ball cups all the way until snug.
PAGE 7
:: Bag 2 - Step 5 71115 Front Shock Tower, T6.1 25211 x2 M3 x 10mm BHCS 91766 Top Plate, B6 25203 x4 M3 x 12mm FHCS :: Bag 2 - Step 6 71123 Front Body Post, SC6.1 1 2 3 4 ! Note: Post location may vary based on body used. Recommended starting spot marked. 91815 x2 Shock Bushing, 10mm 25211 x2 M3 x 10mm BHCS 31532 M3 x 8mm BHCS 25189 x2 M3 x 22mm BHCS 71032 x2 M2.5 x 14mm SHCS 71123 Front Body Mount, SC6.1 71124 Front Bumper Brace, SC6.
PAGE 8
:: Bag 2 - Step 8 71124 Front Bumper, SC6.1 91670 x2 Hinge Pin (front, Inner) 25204 x2 M3 x 16mm FHCS 25211 x2 M3 x 10mm FHCS 25225 x2 M3 x 3mm Set Screw :: Bag 3 - Step 1 31531 M3 x 6mm BHCS #1596 lock 91776 Steering Block (4mm) 91560 x2 5 x 10 x 4 Bearing 4L 31382 FT Ballstud Washer, Aluminum (1mm) thread 91048 Heavy-duty Ballstud, 8mm 91679 Steering Block Arm ! There are two sets of steering blocks included with your kit, a 3mm and a 4mm.
PAGE 9
:: Bag 3 - Step 3 25187 x2 M3 x 14mm BHCS ! 91676 x2 Caster Hat Bushing Top: 2mm Bottom: 1mm #91670 - Hinge Pin will be tight in the caster blocks, but should rotate freely in the front arms. 91675 Caster Block Spacer 91670 x2 Hinge Pin (front, Outer) 31510 M2 x 4mm BHCS Build 2 (1 left, 1 right) Build 2 (1 left, 1 right) :: Bag 4 - Step 1 ! 71105 x2 Rear Arms, T6.
PAGE 10
:: Bag 5 - Step 1 1 #659 lube diff 6581 x14 3/32 carbide diff balls 7666 Diff Drive Ring #65 91 dif f lu be 91419 Diff Gear, 52T 7666 Diff Drive Ring #65 91 dif f lu be 91701 Ball Diff Outdrive 91701 Ball Diff Outdrive :: Bag 5 - Step 2 6573 x2 Diff thrust washer #6588 black grease 6574 x6 5/64 diff thrust balls 31400 x2 5 x 8 x 2.5mm, Bearing 6573 Diff thrust bolt :: Bag 5 - Step 3 6575 Locking t-nut ! Compress spring first.
PAGE 11
:: Bag 6 - Step 1 91799 B6.1 Laydown Top Shaft 91790 B6.1 Layback Gearbox (L & R) 91560 x4 5 x 10 x 4, Bearing 31448 2.5x8mm FHCS 91047 x2 Heavy-duty Ballstud, 6mm 91717 Idler Gear 26T 91775 B6.1 Rear Ballstud Mount 91132 Idler Gear Shaft, Aluminum 89203 x2 3x16mm BHCS 31382 x2 FT Ballstud Washer, Aluminum (1mm) :: Bag 6 - Step 2 ! Add a drop of Diff Lube (#6591) to the teeth of the diff gear, idler gear, and top shaft. 89202 x2 3 x 12mm BHCS 91563 x2 10x15x4 Bearing 91790 B6.
PAGE 12
:: Bag 6 - Step 4 91803 B6.1 Slipper Hub, Inner 91812 B6.1 Spur Gear, 81T 9611 x2 Slipper Pad, V2 #91812 spur gear walls should point away from gear box. 91801 Slipper Spring Adapter, Outer 25215 M3 Locknut 91801 Slipper Spring Adapter, Inner ! Set nut flush with top shaft screw. 91801 Slipper Spring 91799 B6.1 Top Shaft Screw ! ! 91804 B6.1 Slipper Hub, Outer See page 21 for gear mesh, and slipper clutch setting instructions! 91799 B6.
PAGE 13
:: Bag 6 - Step 7 25187 x4 M3 x 14mm BHCS 71125 Rear Bumper, SC6.
PAGE 14
:: Bag 7 - Step 2 91438 CVA Coupler 71113 CVA Bone, 91mm 91563 10 x 15 x 4 Bearing 8 e 58 eas #6 gr k ac bl 92062 HD CVA Axle, B64 91438 CVA Pin 91562 6 x 13 x 5 Bearing Build x2 (left and right side) :: Bag 7 - Step 3 91611 M1.6 x 5mm SHCS 92055 x2 Rear Hub Spacer 91436 CVA Wheel Hex Pin 91610 Clamping Wheel Hex, 7mm Offset (rear) ! Do not overtighten the 1.6 x 5mm SHCS into the Clamping wheel hex.
PAGE 15
:: Bag 8 - Step 2 91722 Ball Cup 9175 Turnbuckle 3x58mm 91722 Ball Cup Front Camber Turnbuckle 37.00mm ! Orient the notch to the left throughout the car. It indicates which end has the left hand threads! Racers Tip: Use black grease (#6588) on the threads of the turnbuckles for easier ball cup installation! Build x2 (left and right side) :: Bag 8 - Step 3 ! Orient the notch to the left throughout the car.
PAGE 16
:: Bag 9 - Step 2 91491 12mm Shock Cap O-Ring 91481 12x27.5mm V2 Shock Bodies (front) 91483 12x36mm V2 Shock Bodies (rear) ! ! Lightly rub shock oil on the o-ring before installation! 91495 V2 Shock Spacer Racers Tip: #11 0 en 5 slim e gre 91495 x2 V2 Shock Hat Bushing 5 e 10 #1 slim n e e r g 91820 Shock Eyelet Front Shocks - Long Rear Shocks - Long 31327 VCS3 Shock Bottom Cap O-Ring 91493 x2 X-Ring There is a short and long shock eyelet. Front and rear shocks use the long eyelet.
PAGE 17
:: Bag 9 - Step 5 ! Use middle hole in front arm! 25612 M3 Locknut w/Flange 25188 M3 x 20mm BHCS Build x2 (right and left side) 25612 M3 Locknut w/Flange 25187 M3 x 14mm BHCS Build x2 (right and left side) :: Bag 10 - Step 1 25225 M3 x 3mm Set Screw Motor not included! 6338 Antenna Tube & Cap Receiver not included! ! The antenna can be mounted on the left or right side of the chassis.
PAGE 18
:: Bag 10 - Step 3 91731 Battery Strap, B6 ! 89218 x2 M3 x 8mm 25211 x2 Washer M3 x 10mm BHCS Make sure the battery strap shoulder screw is flush with the top of your battery pack! F R 91731 x2 Battery Strap Nut, B6 :: Bag 10 - Step 4 91729 x2 Thumb Screw, B6 Front 1 2 3 4 5 :: Bag 10 - Step 5 97 #15 ue gl ca ! Carefully apply ca glue (tire adhesive) to the tire bead on the side.
PAGE 19
:: Bag 10 - Step 6 91826 M4 Steel Serrated Nut, with Flange Silver 91826 M4 Steel Serrated Nut, with Flange Silver Build 2 (1 left, 1 right) Build 2 (1 left, 1 right) :: Rear Shock Mounting Option - Step 1 ! Use this setup to mount shocks on front of the rear arm. Suggested for high grip conditions. 25189 x2 M3 x 22mm BHCS 71116 Rear Shock Tower, T6.1 Shocks mounted on the front of the rear arm increases forward weight bias.
PAGE 20
:: Tuning Tips Painting: Your Kit requires a clear polycarbonate body. You will need to prep the body before you can paint it. Wash the INSIDE thoroughly with warm water and liquid detergent (do not use any detergents with scents or added hand lotion ingredients!). Dry the body using a clean, soft, lint-free cloth. Use the supplied window masks to cover the windows from the INSIDE of the body (RC bodies get painted on the inside).
PAGE 21
:: Tuning Tips (cont.) Motor Gearing: Proper motor gearing will result in maximum performance and run time while reducing the chance of overheating and premature motor failure. The gear ratio chart lists recommended starting gear ratios for the most widely used motor types. Gear ratios will vary depending upon motor brand, wind, and electronic speed control. Consult your motor and electronic speed control manufacturers for more information.
PAGE 22
:: Tuning Tips Front Camber Links: Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the tower. Shortening the camber link (or lowering the ball end) will give the front end less roll and quicken steering response. Lengthening the camber link (or raising the ball end) will give the front more roll and slower steering response. Longer camber links are typically used on high grip tracks and shorter links tend to work better on medium-grip loose tracks.
PAGE 23
:: Shocks 4187 31327 31510 89278 91304 91481 91483 91491 91492 91493 91495 91619 91623 91626 91627 91814 91819 91820 :: Ball Differential 12 2 ea. 6 20 2 2 2 1 2 8 1 2 2 4 4 4 ea. 4 1 .030 Nylon Washer VCS3 Shock Bottom Cap and O-Ring 2x4mm BHCS 2.6x6mm Washer 12MM Threaded Collar and O-Ring 12x27.5MM V2 Shock Bodies 12x36MM V2 Shock Bodies 12MM V2 Shock Rebuild Kit M2 x 4mm BHCS with Washer FT Low Friction X-Rings 12 mm V2 X-Ring Rebuild Kit 3 x 27.
PAGE 24
:: Transmission 25188 25202 25204 31383 31448 31532 89202 89203 89218 91048 91132 91560 91709 91717 91775 91790 91795 91799 91813 91819 M3 x 20mm BHCS 10 M3 x 10mm FHCS 10 M3 x 16mm FHCS 10 Ballstud Washers, 5.5x2.0 mm, 10 blue aluminum M2.5 x 8mm FHCS 10 M3 x 8mm BHCS 10 M3 x 12mm BHCS 10 M3 x 16mm BHCS 10 M3 x 8mm Washers 10 Heavy-duty Ballstuds, 8 mm 10 4x4 FT Idler Shafts, aluminum 2 FT Bearings, 5x10x4 mm 4 B6 Chassis Braces 1 ea. B6 Idler Gear, 26T, standup 2 B6.1 Rear Ballstud Mount 1 B6.
PAGE 25
:: Optional Gear Differential 31522 91563 91780 91782 91783 91784 91785 91786 91792 5450 5451 5452 5444 5453 5446 5454 5455 5447 5456 5457 5458 5448 5459 5461 5463 5465 M2.5 x 10mm BHCS FT Bearings, 10x15x4 mm B6.1 Gear Differential Rebuild B6.1 Gear Differential Seals B6.1 Gear Differential Case B6.1 Aluminum Cross Pins B6.1 Gear Differential Outdrives B6.1 Gear Differential B6.
PAGE 26
:: Front Arm 25187 25188 25215 31382 31510 31531 31532 71103 71111 91048 91049 91560 91670 91676 91679 91776 91826 M3 x 14mm BHCS M3 x 20mm BHCS M3 Locknut, Black FT Ballstud Washer, aluminum1mm M2 x 4mm BHCS M3 x 6mm, BHCS M3 x 8mm, BHCS T6.1 Front Arms T6.1 Front Axle, 8.50mm Heavy-duty Ballstud, 8mm Heavy-duty Ballstud, 10mm FT Bearing, 5 x 10 x 4 Hinge Pin Set, B6 B6 Caster Hat Bushings B6 Steering Block Arms B6.1 Caster/Steering Blocks M4 Serrated Wheel Nut, Steel (Silver) 10 10 10 10 6 6 6 Pr.
PAGE 27
:: Front Shock Tower 25189 25203 25612 31532 71032 71115 71123 91815 M3 x 22mm BHCS M3 x 12mm FHCS M3 Locknuts w/Flange M3 x 8mm BHCS M2.5 x 14mm SHCS T6.1 Front Shock Tower SC6.1 Body Mounts Shock Bushing, 10mm 10 10 10 10 10 1 1 4 71123 71123 71123 91815 25189 25612 25189 31532 91815 25612 31532 25203 31532 25203 71115 :: Rear Shock Tower 25187 25189 25211 25612 31448 71032 71116 71123 89202 91816 M3 x 14mm BHCS M3 x 22mm BHCS M3 x 10mm BHCS M3 Locknuts w/Flange M2.5 x 8mm FHCS M2.
PAGE 28
:: Front and Rear Bumpers 25187 25211 25215 71037 71124 71125 M3 x 14mm BHCS M3 x 10mm BHCS M3 Locknut, Black M3 x 45mm BHCS SC6.1 Front Bumper & Nerf Bars SC6.1 Rear Bumper 10 10 10 10 1 1 25187 71125 71125 25215 71125 71124 71124 71037 71125 25211 :: Front Bulkhead / Steering 25187 25204 25211 25225 31283 31382 89202 91048 91049 91475 91656 91667 91678 91766 M3 x 14mm BHCS M3 x 16mm FHCS M3 x 10mm BHCS M3 x 3mm Set Screw Ball Studs, Long, 5mm Ballstud Washers, 5.5x1.
PAGE 29
:: Chassis 6338 25201 25202 25204 25225 31532 31541 71120 71121 71124 91670 91688 91772 91734 92014 Antenna Tube & Cap (black) M3 x 8mm FHCS M3 x 10mm FHCS M3 x 16mm FHCS M3 x 3mm Set Screw M3 x 8mm BHCS M3 x 6mm FHCS SC6.1 Chassis SC6.1 Side Rails SC6.1 Nerf Bars Hinge Pin Set, B6 Aluminum Arm Mount (D), B6 B6.1 Aluminum Arm Mount (C) Battery Foam, B6 Arm Mount Inserts 1 20 20 20 20 10 10 1 Pr. Pr. 1 1 1 1 4 ea.
PAGE 30
:: Reedy Motors / Spare Parts / Accessories MOTORS :: Reedy Chargers / Accessories 256 257 258 259 260 261 262 263 264 265 266 284 285 293 294 27401 27402 27403 27404 Sonic 540-M3 10.5 Sonic 540-M3 9.5 Sonic 540-M3 8.5 Sonic 540-M3 8.0 Sonic 540-M3 7.5 Sonic 540-M3 7.0 Sonic 540-M3 6.5 Sonic 540-M3 6.0 Sonic 540-M3 5.5 Sonic 540-M3 5.0 Sonic 540-M3 4.5 Sonic 540-M3 4.0 Sonic 540-M3 3.5 Sonic 540 FT 17.5 Fixed Timing Sonic 540 FT 13.5 Fixed Timing S-Plus 21.5 Spec S-Plus 17.5 Spec S-Plus 13.
PAGE 31
:: MyLaps Transponders :: Factory Team and Option Parts 71104 71106 71122 91494 91495 91553 91580 91581 91582 91583 91584 91585 91588 91589 91592 91593 91594 91595 91596 91597 91609 91658 91659 91668 91669 91680 91689 91699 91707 91711 91714 91745 91746 91747 91748 91749 91750 91751 91752 91753 91754 91755 91773 91784 91786 91800 91821 91822 91823 92098 92099 T6.1 Front Suspension Arm (HARD) T6.1 Rear Suspension Arm (HARD) SC6.
PAGE 32
Driver: Event: Team Kit Stock Setup Date: Track: Qualify: Front Suspension: Ride Height: 30mm Camber: -1° Toe: 0° Arm Type: Kit #71103 Tower Type: Kit #71115 Caster Block Insert: +5° 4mm Plastic 25° 8.5mm Steering Block: Bulkhead Type: Kick-Up Angle: Wheel Hex: TQ: Anti Roll Bar: Main: Finish: Bump Steer Spacing: White (0.8mm) Gray (0.9mm) Blue (1.
PAGE 33
Driver: Event: Date: Track: Qualify: TQ: Main: Finish: Best Lap Time: Front Suspension: Anti Roll Bar: Ride Height: Camber: Toe: Arm Type: Axle Height: Bump Steer Spacing: White (0.8mm) Gray (0.9mm) Blue (1.
PAGE 34
Associated Electrics, Inc. 26021 Commercentre Dr. Lake Forest, CA 92630 USA http://www.RC10.com https://twitter.com/Team_Associated https://www.instagram.com/teamassociatedrc/ https://www.facebook.com/TeamAssociated/ call: (949) 544-7500 - fax: (949) 544-7501 Check out the following web sites for all of our kits, current products, new releases, setup help, tips, and racing info! www.TeamAssociated.com. - www.RC10.