ASC70007 SC6.1 Short Course Truck Manual

:: Bag 3 - Step 2
:: Bag 3 - Step 1
8
:: Bag 2 - Step 8
Build 2 (1 left, 1 right)
Build 2 (1 left, 1 right)
91049
Heavy-duty
Ballstud,
10mm
25215
M3 Locknut,
black
91776
Caster Block
Insert (+5°)
There are three caster
block inserts included
(0°, +/- 2.5 °, +/- 5 °).
+5 ° is the standard
insert used.
Tab up = positive caster
Tab down = negative caster
There are two sets of steering
blocks included with your kit, a 3mm
and a 4mm. The 4mm steering
blocks are used for the kit setup.
!
!
91776
Caster
Block
You can install an
optional #31520 screw
to use as a steering
stop setting.
You can install an
optional #4670 set
screw for extra hold on
the caster block inserts
and hinge pin.
Total
Caster
25° 25° 30° 20°2 7. 5 ° 22.5°
0 2.5 up 5 up2.5 down 5 down
30° 30° 35° 25°32.5° 2 7. 5 °
Bulkhead
Orientation
Caster Block Insert
There are two sets of steering
blocks included with your kit, a 3mm
and a 4mm. The 4mm steering
4L
25215
M3 Locknut,
black
91679
Steering
Block Arm
71124
Front
Bumper,
SC6.1
91048
Heavy-duty
Ballstud,
8mm
31382
FT Ballstud
Washer,
Aluminum
(1mm)
31532
M3 x 8mm
BHCS
x2
There are two sets of steering
blocks included with your kit, a 3mm
and a 4mm. The 4mm steering
blocks are used for the kit setup.
!
There are two sets of steering
blocks included with your kit, a 3mm
and a 4mm. The 4mm steering
Steering
Block Arm
FT Ballstud
Washer,
Aluminum
25204
M3 x 16mm
FHCS
25211
M3 x 10mm
FHCS
x2
x2
91670
Hinge Pin
(front, Inner)
25225
M3 x 3mm
Set Screw
x2
x2
x2
31531
M3 x 6mm
BHCS
91560
5 x 10 x 4
Bearing
71111
Front Axle,
8.5mm
91776
Steering
Block
(4mm)
#1596
thread lock