ASC80937 RC8T3.1 Manual

31
:: Wheels / Tires / Body - Misc. - Step 2
Install wheel nuts (#81082)
with the serrated edge
towards the wheel.
Install wheel nuts (#81082)
with the serrated edge
towards the wheel.
!!
81082
Wheel Nuts,
17mm
(Blue)
81082
Wheel Nuts,
17mm
(Blue)
:: Wheels / Tires / Body - Misc. - Step 1
Wheels, Tires, and Foam
Inserts Not Included!
!
Tires:
When gluing tires to wheels, use a fast-curing
tire glue (CA) (AE #1597). This is available at
your local hobby shop. Make sure to clean the
mounting surface of the tire and wheel with
alchohol for best adhesion.
#1597
CA tire glue
Build four
wheels/
tires
!
:: Wheels / Tires / Body - Misc. - Step 3
Painting Tips:
Your new kit comes with a clear polycarbonate
body. You will need to prep the body before you
can paint it. Wash the inside thoroughly with
warm water and liquid detergent. Dry the body
using a clean, soft, lint-free cloth. Install the
window masks on the inside of the body
(RC car bodies get painted on the inside).
If creating a design, using high quality
masking tape, apply tape to the inside of the
body to create a design. Spray (either rattle
can or airbrush R/C specific paint) the paint to
the inside of the body (prefferably dark colors
first, lighter colors last).
NOTE: use ONLY paint that is recommended
for use with (polycarbonate) plastics. If you do
not, you can destroy the polycarbonate body!!!
After painting, cut the body along the trim
lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and
antenna!