User manual EDITED: SEPT 23, 2019 Volume 1
TABLE OF CONTENTS 1. INTRODUCTION 3 2. LAYOUT 4 3. OVERVIEW 5 4. INSTALLATION / FAQ 6-7 5. NAVIGATING THE FUSION a. JOYSTICK 8 b. Main screen - MATRIX 8 c. FAVORITES 8 d. MAIN MENU 9 i. BANDSCAN 9 ii. SETTINGS 9 - 10 iii. QUAD FIND 11 iv. MULTILOCK 11 v. LAPTIMER 11 vi. AUTO LOCK 11 6.
INTRODUCTION If you are reading this, you probably just purchased the best goggle module in the world, the TBS FUSION, which was a collaboration with the nerds over at BrainFPV, the magician behind Achilles FPV, and the sexy unicorns over at Team Blacksheep. We know you are super excited to get started.
LAYOUT LED’s DISPLAY TOP ANTENNA BOTTOM ANTENNA JOYSTICK Antenna connectors: Connect SMA antennas here. Some Stubby Antennas will need an adapter to fit. But don’t worry, we included a right angle adaptor in the box. Display: OLED display showing status information and menu. The same information is also shown in your goggles on-screen display (OSD). JOYSTICK: 5D joystick to navigate the menu etc. Center press is “enter”. LED’s: Shiny blue LED’s showing which antenna is being used.
OVERVIEW 5.8 GHz Bands Antenna Connectors Fat Shark, RaceBand, A, B, E, Favorites SMA Operating Voltage 5.0V - 8.4V (2S) Power Consumption WiFi off: 5V: 380 mA, 8.4V: 270 mA WiFi on: 5V: 440 mA, 8.4V: 320 mA Display LED’s Joystick Beeper 64 x 128 pixel OLED (blue) 2 blue LED’s indicating active antenna 5D joystick for navigation of the UI Variable frequency beeper WiFi IEEE 802.11 b/g/n (2.
INSTALLATION DEETS The Fusion is an advanced module and uses more power than the other modules on the market due to WiFi module used for future Crossfire connectivity. Therefore it is necessary to provide external power to the Fusion depending on your goggles and on whether you plan to use WiFi.
INSTALLATION AND UPDATE install power board step by step #waynehofanclub Update to the latest firmware 1. 2. 3. Power TBS FUSION through your goggles Plug in USB Open TBS Agent X 4. Find the TBS FUSION (green dot on top indicates that it is connected) 5. Click ‘MANAGE’ 6. 7. 8. 9. 10. Click ‘FIRMWARE’ Select the LATEST VERSION Click UPDATE’ Click ‘UPDATE’ again It will reboot and flash the newest firmware! Things to look out for / faq In versions of TBS Agent X 2.
NAVIGATING THE FUSION WITH YOUR FINGER, GENTLY TOUCH THE joystick FOR OPTIMAL RESULTS Main screen - MATRIX FAVORITES 1. JOYSTICK Change band Change channel up/down left/right you can save up to 8 channels 4. Favorite channels are in “band X” in the matrix 5. To delete, long click on the Xband. 6. You have to use Agent X to rearrange the list In the matrix, go to your favorite channel 2. Long center press 3.
NAVIGATING THE FUSION MAIN MENU overview SHORT CENTER PRESS to enter the ● ● ● ● ● ● MAIN MENU BANDSCAN BANDSCAN SETTINGS QUAD FIND MULTILOCK LAPTIMER AUTO LOCK scans the bands and detects the best channels Use Up/Down to change Band settings overview press center or right to enter SETTINGS ● ● ● ● ● ● ● SOUND OSD CRSF FUSION WIFI CALIBRATE LEft Right Swap 9
NAVIGATING THE FUSION OSD (on/off) TURN SOUND (on/off) -beeper for menu clicks coming soon on screen display shows current frequency channel and RSSI FUSION (on / old school mode) Fuses video together and does advanced signal reconstruction WIFI (on/off) disables or enables WiFi module *USES LESS POWER WHEN DISABLED traditional diversity mode (no signal reconstruction). use as fallback for cameras that cause problems.
NAVIGATING THE FUSION QUAD FIND MULTILOCK search mode to find your quad Detects up to & lists 8 active channels Uses directional antenna and beeper indicates signal strength guiding you to your lost quad. You can browse them one by one by pressing up or down 1. 2. LAP TIMER Aka race timer LAPS - Set the number of laps you want to fly TIME - minimum lap time to prevent double laptime counts 3. RSSI - threshold for detecting a lap - it needs to be set so it reliably detects the gate 4.
SUPPORT As with most of our products, we will constantly be improving it to give you the best possible performance. Your feedback is extremely important, so if you are having any issues, please submit a new support ticket by CLICKING HERE or join us in the TBS LOUNGE on Facebook will Subm help ittin and ga will us effici ti entl allo y org cket w us an to g et ba ize your Plea ck t ques man o yo tion ner.