TBS Tracer Manual
Radio connection
JR-bay radios
If you use a radio with standard jr-bay style module bay, you can easily plug the Tracer transmitters into
them.
Potential JR-bay issues
When you have set up everything properly in OpenTX but your module still stays off, the radio pins did not
slide into the Tracer Tx. In this case you may need to nudge the pins in the JR bay just a little bit to the right
or left side and plug the module back in. The JR bays also have manufacturing tolerances - if the fit is too
loose for your taste, you may want to place a small piece of soft foam inside the JR bay before fitting the JR
module.
11