TBS Unify Pro HV 5.8GHZ VTX - Manual V2



TBS UNIFY PRO 5G8 HV (RACE)
>Q3 2018 





- 7V-26V (red cable) - Connect directly to
Battery voltage, 2S to 6S LIPO
- GND (black) - Ground connection
- 5V out (orange) - Supply for your camera.
Never connect to Battery or it will
permanently damage your VTX!
- GND (black) - Ground connection for
camera
- Video (yellow) - Video input. Make sure
video cable is short and not routed near
any noisy source like ESC, motor cables or
RX Receiver which has a back channel (this
causes video distortion).
- Audio (green) - connect to microphone or
any other audio source.
- Data (white) - Smartaudio VTX remote
control input.
 


12
