TBS Unify Pro HV 5.8GHZ VTX - Manual V2



Specifications


TBS UNIFY PRO nano
TBS UNIFY PRO V2 5G8
TBS UNIFY PRO 5G8 HV
TBS UNIFY PRO HV RACE
Input
voltage:
Regulated 5V
Voltage peaks max 6.0V!!!
(Unify PRO V3 max. 13V peaks)

(Only use DCDC converter with proper LC filtering!
Example: PNP25/PNP50/PNP PRO)
6V to 28V (2S - 6S) VBat, peak max 31V
Please connect directly to battery voltage!
Power
Output
None
5V for Camera @ 0.5A max.
Extra
features:
CleanSwipe
PitMode
Remote
software
protocol
SmartAudio V2.0 LITE
( requires 3.3V level
and soft- or
hardware pull low ),
Batch No <2xxx: SmartAudio
V1.0

Batch No >2xxx: SmartAudio
V2.0
SmartAudio V2.0
Output
Power
14dBm (25mW)
17dBm (50mW*)

14dBm (25mW)
23dBm (200mW*)
27dBm (500mW*)
29dBm (800mW*)
14dBm (25mW)
23dBm (200mW*)

Pit mode

Activate: press button during powered up.

LED: in menu for channel setting
Activate: press button
during powered up.
LED: red

Deactivate: automatic with next power up
(without pressed button)

Deactivate: press button
during powered up.
LED: blue
(red & blue when unlocked)
Pit mode
-> flight
mode

Reboot VTX
After boot up, press button
for 8sec
Channels:

Band A (8ch), B (8ch), E (5ch)
Fatshark 8ch
Race Band 8ch
Band A (8ch), B (8ch), E
(5ch)
Fatshark 8ch
Race Band 8ch
Low Race Band 8ch **
Audio on
6.5MHz
No
Yes
Power
consumpt
ion
25mW: 250mA
50mW: 300mA
25mW: 250mA
200mW: 320mA
500mW: 460mA
800mW: 600mA
25mW: 250mA
200mW: 320mA
Range:
1km
Up to 4 km with omnidirectional RHCP antennas
Up to 2 km
Antenna
connector
:
U.FL high strength
SMA
RP-SMA
SMA

SMA
or
MMCX


2
