User Manual

83
73
64
81
80
BB
BB
B
AA
AA
A
G E (ContinG E (Contin
G E (ContinG E (Contin
G E (Contin
ued)ued)
ued)ued)
ued)
20
 1. Use the short, 4-40 Thread-Cutting Screw, included in the wrench
bag, to pre-tap the three holes noted in Figure E-11. Thread the Screw
all the way into and out of each hole on the Left Gearbox Half (83).
 2. Insert two 3/16" x 3/8" sealed Bearing (80) into the two top
bearing seats of the left Gearbox Half.
 3. Insert a 1/2" x 3/4" Bearings (81) into the lower Bearing seat of
the left Gearbox Half.
Step E-11Step E-11
Step E-11Step E-11
Step E-11
Figure E-11
Step E-12Step E-12
Step E-12Step E-12
Step E-12
 1. Insert the Top Shaft (73) into the forward-most Bearing (80) in
the left Gearbox Half (83).
*NOTE: be sure the head of the Diff Adjusting Screw faces the
right side of the Gearbox Half. This will allow easy adjustment
while running your truck.
 2. Insert the Differential assembly into the 1/2" x 3/4" Bearing
(81) in the left Gearbox Half. Insert the Diff Nut (57) side first.
Figure E-12
80
81
83
PRE-TAP
THESE HOLES
Left Gear Box Bearing Install:
Diff and Top Shaft Install:
80
81