User Manual

171

175

174

BaBa

g H g H

g H

(Contin(Contin

(Contin

ued)ued)

ued)

 1. Place the silicone Exhaust Coupler (174) over the end of the

Exhaust Header (171) as shown.

 2. Insert the Tuned Exhaust Pipe (175) into the opposite end of

the Exhaust Coupler so that the exhaust outlet on side of the Pipe

points away from the truck, and the mounting stud points straight up.

Step H-12Step H-12

Step H-12

Step H-13Step H-13

Step H-13

Figure H-13

Figure H-12

 1 . Insert the straight end of the Pipe Mount Bracket (177) into

the unthreaded hole in the mounting stud on the Tuned Pipe (175) so

that the bend is behind the mounting stud. Thread a 5-40 Set Screw

(47) into the threaded hole at the top of the mounting stud of the Pipe

but do not tighten completely.

 2. Place a #4 Washer (23) over a 4-40 x 3/8" Cap-Head Screw (17).

Position the loop of the Pipe Mount over the hole just forward of the

Fuel Tank in the Center Brace (29). Place the 4-40 Screw and Washer

through the loop in the end of the Pipe Mount and thread it until tight

as shown in Figure H-13. Tighten the 5-40 Set Screw in the top of the

Pipe Mount on the Pipe.

Pipe Mount Adjustment:

Tuned Pipe Install:

177

175