Datasheet
47
Brushless Systems | Vortex Pro Race
Rennen
13.5T 10.5T 9.5T 8.5T 7.5T 6.5T 5.5T 4.5T 4.0T 3.5T 3.0T 2.5T
Combo part number ORI66017 ORI66016 ORI66015
Motor part number ORI28211 ORI28210 ORI28209 ORI28208 ORI 28207 ORI 28206 ORI 28205 ORI 28204 ORI 28203
ORI 28202 ORI 28201 ORI 28200
Input voltage 3.2V - 11.1V 3.2V - 11.1V 3.2V - 11.1V 3.2V - 11.1V 3.2V - 11.1V 3.2V - 11.1V 3.2V - 8.4V 3.2V - 8.4V 3.2V - 8.4V 3.2V - 8.4V 3.2V - 8.4V 3.2V - 8.4V
RPM @7.4V 22940 26788 30710 35150 38480 40700 47730 59052 65120 73630 84360 96570
kV 3100 3620 4150 4750 5200 5500 6450 7980 8800 9950 11400 13050
Power [W] 207 262 281 298 340 395 461 569 620 698 764 987
Current [A] 27.8 35.9 38.4 40.3 45.9 53.4 62.3 76.9 83.8 94.3 103.2 121.0
Efficiency 95% 94% 93% 93% 93% 93% 93% 92% 91% 90% 89% 88%
Magnet type sintered sintered sintered sintered sintered sintered sintered sintered sintered sintered sintered sintered
Works w/ sensor
and sensorless ESC
yes yes yes yes yes yes yes yes yes yes yes yes
Adjustable timing yes yes yes yes yes yes yes yes yes yes yes yes
Weight 172 gr
Lenght 51.1 mm
Diameter 35.8 mm
Shaft lenght 15.2 mm
Shaft diameter 3.14 mm
Rotor diameter 12.36 mm
The Team Orion Vortex Race Spec BL ESC is a competition ESC designed to deliver the highest possible performance. It can handle the most powerful
racing motors in any racing conditions and uses the latest software and hardware brushless technology.
Latest 1.5 version software
Low profile
Compact size (33.4x37.0x16.8mm)
Lightweight (30.8g ohne Kabel)
Sensored technology
Variable Frequency System (VFS)
Max current: 780A, max peak current: 3120A
Team Orion Vortex Race Spec | Version 1.5 (ORI65008)*
Team Orion Vortex Pro Race Brushless Motor
Up to 2.5T w/ cooling set, up to 4.5T w/o cooling set
LiPo cut-off
Developed and used by pro racers
ICS-ready (optional adapter and software for personalized settings)
5 factory preset memory profiles
Optional cooling set (ORI65022)
Also available with cooling set included (ORI65009)
Fully rebuildable
Freely adjustable timing
New optimized sensor position
Three piece can design
Thicker backplate for improved cooling and vibration dampening
Thicker soldering tabs for better cooling and conductivity
Lubrification port
Removable sensor plate
Optmized construction for better magnetic field management
Lower running temperature and higher efficiency
12.4mm/4.8mm sintered magnet
Thicker front plate for higher rigidity and improved cooling
Thicker winding connection ring for better performance
Designed in Switzerland
Brushless Sensor Wire
ORI41444 Sensor Wire 270 mm
ORI41445 Sensor Wire 150 mm
ORI41446 Sensor Wire 110 mm
Features