Operation Manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
9 TEAM TO 3 - 070213
Assembly page 9/24
Fax [phone]
CAUTION: the bread carriage handle will not stay down if the appliance is not plugged in!
OPERATION
 Before using your appliance for the first time, check if it is clean (see “Maintenance and
cleaning”) as it comes into direct contact with bread. Check if any object has fallen into
the slots.
 In the first time, connect the appliance only to a mains earthed wall socket.
 Place the bread slices in the slots (for the French bread, cut a loaf shorter than the slots,
then cut it in two pieces along its length.). Your appliance is provided to receive French
bread, but also pieces of toast or other bread slices if their thickness and their length are
shorter than the one of the slots. Make sure not to force when inserting the bread in order
not to block it in the slots.
 Press down the bread carriage handle until it stops. Then release the pressure and the
handle will stay in the lower position, which means that the heating process has begun. If
the handle comes up immediately, check if the appliance is plugged in as it blocks when
the unit is plugged in.
 You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1 to 6
Therefore you only have to turn clockwise to increase the intensity, and anticlockwise to
decrease it. The higher the number is, the more toasted the bread will be.
 During the functioning, if you think that the bread is toasted enough or for another reason,
you can break the heating process, simply by pressing the cancel button.
 Always unplug the appliance after use and let it cool down before handling or storing it.
RACK FOR BUN WARMING (Cf. page 4)
Your appliance is provided with a rack for bun warming. To install the rack, bend its feet
downwards and fold them outwards till they block and come to stand perpendicularly towards
the upper part of the rack. Then put the rack on the slots of the toaster. To store the rack,
proceed inversely.
CLEANING
 Before attempting any cleaning operation, make sure the toaster is unplugged from the
supply socket and fully cooled down.
 To remove bread crumbs slide the crumb tray situated on the side of the appliance.
 Caution! It is very important to empty the crumb tray regularly. Crumbs that have
accumulated in the toaster might burn and the appliance might catch fire.
 To clean the exterior surfaces, simply wipe over with a soft damp cloth.
 ON NO ACCOUNT MUST THE TOASTER BE IMMERSED IN WATER.
 All other maintenance and repair should be performed by a qualified technician.
PROTECTION OF THE ENVIRONMENT– DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol on the
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.