Manualshelf

Datasheet

ManualsBrandsTEAPO ManualsCapacitorsElectrolytic capacitor Snap-in 10 mm 4700 µF 35 V 20 % (Ø x H) 25 mm x 25 mm 1 pc(s)
123456
Series
LG
■ Ideally suitable for using in Switching Power Supplies and orther
High temperature
industrial /commercial applicationsLH
■ Corresponding product to RoHS
■
Specifications
Capacitance Range
Capacitance Tolerance
Where, I :Leakage Current (μA) ; C:Nominal Capacitance(μF) ; V:Rated Voltage(v)
6.3101625355063~100
160~400
420~450500
0.600.550.550.450.350.300.250.150.200.25
6.3~16253550~6380~100
160~400
420~450
500
43322488
1510865
■
Diagram of Dimensions
■
Multiplier for Ripple Current
Frequency coefficient
Frequency (Hz)
6.3~100V
160~250V
315~450V
500V
1.00
1.00
1.00
1K
1.15
1.30
1.35
1.30
50
0.88
0.85
0.88
0.70
60
0.90
0.88
0.90
0.72
1.45
47 ~ 2200μF
Rated voltage(V)
Not more than 200% of the specified value
the capacitor shall meet the following requirements.
Measurement frequency : 120Hz
Dissipation Factor
120
-40 ~ +105℃
6.3 ~ 100VDC
560 ~ 82000μF
160 ~ 500VDC
-25 ~ +105℃
Z-25℃ / Z+20℃
Leakage Current
Endurance
Capacitance Change
Z-40℃ / Z+20℃
After applying rated voltage with rated Ripple current for 2000hrs at 105℃,
initial specified value or less
1.50
1.41
Shelf Life
Low Temperature Stability
10K
1.16
Impedance Ratio (MAX)
After placed at 105℃without voltage applied for 1000 hours,
Within ± 20 % of initial value
the capacitor shall meet the same requirement as Endurance.
1.00
Leakage Current (MAX)
I=0.02CV,L=20m/m,I=0.03CV or 3mA , whichever is smaller.(At 20℃,After 5 minutes)
± 20 % at 120Hz , 20℃
tanδ
Dissipation Factor (MAX)
(tanδ) (120Hz ,20℃)
Rated voltage(V)
Operating Temperature Range
Rated Voltage Range
ALUMINUM ELECTROLYTIC CAPACITORS
High temperature and general purpose
Characteristics
Item
■ Endurance : 105℃ 2000 hours,high temperature than LH
Upgrade

Summary of content (6 pages)