How to Guide
1. PRODUCT NAME
TEC
®
Skill Set™ Silicone Caulk
2. MANUFACTURER
H.B. Fuller Construction Products Inc.
1105 South Frontenac Street
Aurora, IL 60504-6451 U.S.A.
800-832-9002 Customer Support
800-952-2368 Fax
tecskillset.com
3. DESCRIPTION
TEC
®
Skill Set™ Silicone Caulk is easy to use, flexible, and
non-corrosive. It resists water and most common chemicals,
offers permanent flexibility, won't crack, shrink or sag and
provides excellent weatherability. Use for swimming pools,
spas, fountains and other wet area applications.
Key Benefits and Features
Neutral cure, low odor
50% total joint movement
Excellent weatherability, long life
Permanent flexibility and durability, won’t crack or
soften
Easy to use
The neutral curing mechanism of product is ideally
suited for use in confined work areas since no
objectionable odors are generated.
Packaging
10.5 fl. oz. cartridge
Colors
Bright White Clear
Light Buff Silverado
Coverage
Figures shown in the chart are presented only as guidelines.
Coverage will vary with application and bead size.
Bead Size
Approximate Coverage
per 10.5 fl. oz.
3/16”
50 lineal feet
1/4”
25 lineal feet
Suitable Substrates
Natural stone
Metals
Glass
Porcelain
Plastic surfaces
Ceramic/masonry
Wood
VOC 29 g/L
Silicone Caulk
Storage
Store in a cool, dry location. Do not store open containers.
Shelf Life
Maximum of 24 months from date of manufacture in properly stored,
unopened package.
Limitations
• Certain stone surfaces may be stained when sealed with a colored
sealant, test a small area prior to use to determine suitability.
• Temperature Range: -62°F to 350°F (-52.2°C to 176.7°C)
continuous use. -62°F to 400°F (-52.2°C to 204.4°C) intermittent
use.
• Maximum joint depth should not exceed 1/2" thickness (use backer
rod for deeper joints).
• Maximum joint width is 1".
• Not for use in aquarium applications or where subject to abrasion,
abuse or wear.
• Not paintable.
• Not for use on building materials that may bleed oils, plasticizers or
solvent materials (e.g. impregnated wood, oil based caulks).
• Not a structural glazing adhesive.
Cautions
Read complete cautionary information printed on product container
prior to use. For medical emergency information, call 1-888-853-
1758.
This Product Data Sheet has been prepared in good faith on the
basis of information available at the time of publication. It is intended
to provide users with information about and guidelines for the proper
use and application of the covered TEC
®
Skill Set™ brand
product(s) under normal environmental and working conditions.
Because each project is different, H.B. Fuller Construction Products
Inc. cannot be responsible for the consequences of variations in
such conditions, or for unforeseen conditions.
4. TECHNICAL DATA
Applicable Standard
ASTM-C920 – Type S, NS, Class 25; TT-S-00230C (COM-NBS); TT-S-
01543A (COM-NBS); Mil-A-46106
TEC® Skill Set™ Silicone Caulk
Description
Typical Results
Extrusion Rate
200 g/min
Tensile Strength
230 psi (1.57 MPa)
Elongation
350%
Slump
Nil
Shore A Hardness
23
Tack Free Time
20 minutes
Volume Shrinkage
< 3%
Greater than: > Greater than or equal to: ≥ Less than: < Less than or equal to: ≤