Technical Specifications

Page 2 of 6
TA0717
Print Date: 06-26-2015 805196PM
SAFETY DATA SHEET
______________________________________________________________________________
SECTION 4: FIRST AID MEASURES
IF IN EYES: None expected to be needed, however, use an eye wash to remove a chemical from your eye
regardless of the level of hazard.
IF ON SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
IF INHALED: Remove to fresh air. Call a physician if symptoms persist.
IF SWALLOWED: Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care
provider with this MSDS.
SECTION 5: FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use water spray, foam, dry chemical or carbon dioxide.
UNUSUAL FIRE AND EXPLOSION HAZARDS: There is a possibility of pressure buildup in closed containers
when heated. Water spray may be used to cool the containers.
SPECIAL FIRE FIGHTING INSTRUCTIONS: Persons exposed to products of combustion should wear self-
contained breathing apparatus and full protective equipment.
HAZARDOUS COMBUSTION PRODUCTS: Carbon dioxide, Carbon monoxide Nitrogen containing gases
SECTION 6: ACCIDENTAL RELEASE MEASURES
SPECIAL PROTECTION: No adverse health effects expected from the clean-up of spilled material.
Follow personal protective equipment recommendations found in
Section 8 of this MSDS.
METHODS FOR CLEAN-UP: Scrape up and place in disposal container.
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 7: HANDLING AND STORAGE
Handling: No special handling instructions due to toxicity.
Storage: Store in a cool, dry place.Protect from freezing
Consult the Technical Data Sheet for specific storage instructions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS:
Chemical Name Note ACGIH EXPOSURE LIMITS OSHA PEL
Kaolin clay * (see
below)
2 mg/m3 TWA (particulate matter
containing no asbestos and <1% crystalline
silica, respirable fraction)
15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Mineral oil No data available. 5 mg/m3 TWA (as mist)
*This product contains one or more materials that may be hazardous when present as an airborne dust. During normal handling of the product, the
material is encapsulated within the product and will not present an exposure risk. Once the product has reached its final state and is abraded or
disturbed, dusting and exposure may occur.
ENGINEERING CONTROL METHODS:
VENTILATION: Use local exhaust ventilation or other engineering controls to