Safety Data Sheets (SDS)
Page 1 of 6
ACLR CAULK SD CHR GRAY
Print Date: 06-10-2015 839432PM
SAFETY DATA SHEET
______________________________________________________________________________
REVISION DATE:
05-29-2015
SUPERSEDES:
None
SECTION 1: IDENTIFICATION OF THE PRODUCT AND SUPPLIER
PRODUCT INFORMATION
PRODUCT: ACLR CAULK SD CHR GRAY
PRODUCT DESCRIPTION: Sealant
INTENDED USE: Sealant
PRODUCT IDENTIFIER: 839432PM
COMPANY INFORMATION
H.B. Fuller Construction Products Inc.
1105 S. Frontenac Street
Aurora, IL 60504
Phone: 1-800-552-6225
Medical Emergency Phone Number (24 Hours): 1-888-853-1758
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 2: HAZARDS IDENTIFICATION
GHS Classification:
This product is not classified as hazardous under GHS criteria.
GHS Precautions:
First Aid Measures:
IF SWALLOWED: Do not induce vomiting. Seek medical attention if symptoms
develop. IF IN EYES: Use an eye wash to remove chemical from the eye. IF ON
SKIN: Wash with soap and water. IF INHALED: Remove individual to fresh air after
an airborne exposure if any symptoms develop.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS # PERCENT Classification Note
Crystalline silica 14808-60-7 10 - 30
Carc. 1A; H350
STOT RE 1; H372
* (see below)
Titanium dioxide:CAS:13463-67-7 13463-67-7 0.01 - 0.1
Carc. 2; H351
*This product contains one or more materials that may be hazardous when present as an airborne dust. During
normal handling of the product, the material is encapsulated within the product and will not present an exposure
risk. Once the product has reached its final state and is abraded or disturbed, dusting and exposure may occur.
Unlisted ingredients are not 'hazardous' per the Occupational Safety and Health Administration Hazard
Communication Standard (29 CFR 1910.1200) and/or are not found on the Canadian Workplace Hazardous
Materials Information System ingredient disclosure list. See Section 8 for exposure limit guidelines.
SECTION 4: FIRST AID MEASURES
IF IN EYES: Use an eye wash to remove a chemical from your eye regardless of the level of hazard. Flush the
affected eye for at least twenty minutes. Tilt the head to prevent chemical from transferring to the uncontaminated
eye. Seek medical advice after flushing.
IF ON SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
IF INHALED: Remove to fresh air. Call a physician if symptoms persist.
IF SWALLOWED: Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care
provider with this MSDS.