SDS

Page 1 of 6
ADHESIVE & GROUT SANDED
Print Date: 06-10-2015 836498PM
SAFETY DATA SHEET
______________________________________________________________________________
REVISION DATE:
04-13-2015
SUPERSEDES:
04-13-2015
SECTION 1: IDENTIFICATION OF THE PRODUCT AND SUPPLIER
PRODUCT INFORMATION
PRODUCT: ADHESIVE & GROUT SANDED
PRODUCT DESCRIPTION: Sealant
INTENDED USE: Sealant
PRODUCT IDENTIFIER: 836498PM
COMPANY INFORMATION
H.B. Fuller Construction Products Inc.
1105 S. Frontenac Street
Aurora, IL 60504
Phone: [phone]
Medical Emergency Phone Number (24 Hours): 1-888-853-1758
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 2: HAZARDS IDENTIFICATION
GHS Hazard Symbols:
GHS Signal Word:
Danger
GHS Classification:
Germ Cell Mutagenicity Category 1B; Carcinogenicity Category 1B
GHS Hazard Phrases:
May cause genetic defects..; May cause cancer.
GHS Precautions:
Safety Precautions:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Use personal protective equipment as required.
First Aid Measures:
IF exposed or concerned: Get medical advice/attention.
Storage:
Store locked up.
Disposal:
Dispose of contents/container in accordance with local/regional/national/international
regulation for hazardous wastes.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS # PERCENT Classification Note
Crystalline silica 14808-60-7 10 - 30 Carc. 1A; H350
STOT RE 1; H372
* (see below)
Titanium dioxide 13463-67-7 1 - 5 Carc. 2; H351 * (see below)
Stoddard solvent 8052-41-3 0.1 - 1 Asp. Tox. 1; H304
Carc. 1B; H350
Muta. 1B; H340
*This product contains one or more materials that may be hazardous when present as an airborne dust. During
normal handling of the product, the material is encapsulated within the product and will not present an exposure
risk. Once the product has reached its final state and is abraded or disturbed, dusting and exposure may occur.