Operating Manual

NelumBox® is equipped with an electronic access control using RFID

technology (optional). If the electronic lock is activated, the door can

only be unlocked by RFID tokens/cards or via NFC.

NelumBox® can only be opened when switched on (exception: emer-

gency release; see chapter 6.4.1). To unlock NelumBox®, hold the RFID

token/card to designated area at the front of the device. Successfully

unlocking NelumBox® is conﬁrmed by a green light on the buttons and

via the display.

6.6 Opening / closing NelumBox®

If unlocking is prevented, do not attempt to open the door by force. This

can lead to damage to the device.

• The lock is unlocked by pulling either the upper or the lower

button and by pulling the door. Prevented access is conﬁrmed

by the buttons glowing in red and on the display.

• If the electronic lock of NelumBox® is not activated, simply

open the device by pulling either the upper or the lower

button and by pulling the door.

• If the unit is opened for more than 22 seconds, a warning

signal sounds and the door lights begin to shine in yellow.

The signal warns to quickly close Nelumbox®’s door to avoid

exceeding the set temperature. If the alarm message is

ignored, the signal increases in intensity. The display also

prompts the user to close the door.

• Close the door by applying pressure to the front of NelumBox®.

Press on the area between the display and the hinged handle

or on the LED to close the door.

• Do not press on the display and do not push any button while

closing the door.

• After successfully closing the door, the audible signal, the

lights and the warning on the display disappear.

Warning!