Operating Manual

• If the unit shows visible damage, it must not be put into

operation.

• If the connecting cable of this unit is damaged, it must be

replaced by the manufacturer or a similarly qualiﬁed person

to avoid hazards.

• Repairs to this unit may only be carried out by qualiﬁed

personnel. Improper repairs can pose considerable risks.

• Disconnect the unit from the power supply, before each

cleaning and care; after each use.

• Medicines may only be stored in original packaging /

secondary packaging or suitable containers.

• Compare the voltage information on the nameplate with the

available power supply.

• Connect the unit only as follows:

with the AC connection cable to the AC network.

• Never pull the plug out of the socket using the connection

cable.

• The unit is not suitable for the transport of corrosive or

solvent-containing substances.

• The insulation of the unit contains ﬂammable cyclopentane

and requires a special disposal process. Dispose the unit

properly at the end of its service life.

Basic safety instructions

A basic prerequisite for safe handling and trouble-free operation of this

device is acquaintance with the basic safety instructions. It is not per-

mitted to use the device for a purpose other than that stipulated by the

manufacturer.

Keep children away from the device at all times!

Never open the housing of the device.

Repair work on the device may only be carried out by Tec4med

LifeScience GmbH or by authorised workshops.

Defective parts or components must only be replaced by parts ap-

proved of by Tec4med LifeScience GmbH.

Danger!

Warning!