Owner's manual

1716
Cleaning modes and surface settings
You can select between 4 cleaning modes and 3 surface
settings: Automatic mode, Sweep mode, Mop mode,
HeavyMopmode,Woodoorsetting,Marbleoor
setting,andOutdooroorsetting.
The roller mop will rise or descend
depending on selected cleaning
mode and surface settings.
Cleaning modes
Automatic mode
Activates all functions (sweep, vacuum, and mop). Your
TECBOTM1willnishoneroombeforestartinganother.
Larger rooms will be divides into sections for cleaning.
Mop mode
Activates the mop function and stops the sweep and
vacuum functions. The roller mop will descend to start
mopping.
Sweep mode
Activates the sweep and vacuum functions, and the roller
mopwillbelift.YourTECBOTM1willnishoneroom
before starting another. Larger rooms will be divides into
sections for cleaning.
Heavy mop mode
Rinsestherollermoprst.Therollermopdescendsand
rotates for deep mopping. The wastewater tank pump
will work in real-time.
Surface settings
Wood oor setting
Rinsestherollermoprst.Therollermopdescends,the
vacuum function is activated, and the water used in the
cleaning is controlled.
Marble oor setting
Rinsestherollermoprst.Therollermopdescendsand
rotates for mopping, the vacuum function is activated.
Outdoor oor setting
Rinsestherollermoprst.Therollermopdescendsand
rotates for mopping. The vacuum function is activated at
maximum.
Regular maintenance
V-shape main brush
Recommended to clean up at least once a week.
• Turn over your TECBOT M1, remove the V-shape main
brush cover by pushing on both sides clips.
• Retrieve the V-shape main brush upwards.
• Use the cleaning tools to free any entanglement.
• Reinstall the V-shape main brush and its cover.
Edge-cleaning brush
Recommended to replace after 6 months.
• Turn over your TECBOT M1 and remove the
edge-cleaningbrushesxingscrews.
• Retrieve and clean the edge-cleaning brushes.
• Reinstall and tighten the screws.
Please, retrieve the clean water and wastewater tanks when turning over your TECBOT M1
for maintenance.
!