Owner's manual

2120
Clean the dust box components
Recommended to clean up once a month.
• Open the dust box back cover, and retrieve the HEPA
lterandsponge.
• Rinsethedustbox,sponge,airlter,andbackcover
withcleanwater.Donotusestibrushesorngersto
cleanthelters.
• Shake out the water droplets from the dust bin, sponge,
HEPAlter,airlter,andbackcovers,
• Let them totally dry in the air for at least 24 hours
• Reinstall the dust box component and the dust box
back into your TECBOT M1.
HEPAlter
sponge
airlter
NOTE:
• Recommend replacing the HEPA in between 6 to
12 months to ensure an excellent cleaning effect.
• Use a brush to clean the dust accumulated in the
HEPA filter regularly.
• The longest age of the HEPA filter is 12 months.
Restore factory settings
• Turn OFF your TECBOT M1.
• While pressing in the collision bumper, turn your
TECBOT M1 back ON and wait for the standby
button to turn on and say: “the robot is ready.”
• Release the collision bumper.
• Within 30 seconds, press and hold the standby
button for 5 seconds. Wait for a "ding-dong” sound and
2 green lights blinking.
• TurnyourTECBOTM1OFFandONagaintonishthe
process.
NOTE:
Be aware that restoring factory settings will erase
all user information.