Owner's manual

1312
06 07 08
09 10 11
06 Restart your TECBOT M1 by switching it
OFF and ON. The switch is located at the
bottom of your TECBOT M1.
07 Press and hold the Standby button for
3 seconds until it beeps once to establish
the Wi-Fi connection.
08 ConrmtheWi-Fiindicatorlightisblinking
and after you hear the voice prompt
tap "NEXT."
09 Search and select "SmartLife-XXXX" in
your Wi-Fi network list and return to the
Tecbot Home App.
10 The TECBOT M1 Wi-Fi indicator light
willbeonandstopblinkingtoconrm
pairing.
11 Success! Your TECBOT M1 is ready to do
it all.
AP mode
06 07 08
09 10
06 Restart your TECBOT M1 by switching it
OFF and ON. The switch is located at the
bottom of your TECBOT M1.
07 Press and hold the Standby button for
5 seconds to open your TECBOT M1 Wi-Fi
connection. It will beep twice and you
hear the voice prompt.
08 ConrmtheWi-Fiindicatorlightisblinking
and tap “NEXT.”
09 Keep your device as close as possible
to your TECBOT M1, wait 2 minutes.
The TECBOT M1 Wi-Fi indicator light
willbeonandstopblinkingtoconrm
pairing.
10 Success! Your TECBOT M1 is ready to do
it all.
EZ mode