User's Manual

4/5
18. Meaning of Numbers that Siren Wails and Indicator (Parking) Lights Flash:
No. of Wails and Blinks Meaning
Wails 3 times Enters code-learning/disarming, code renewing mode
Wails 1 time, Blinks 1 time Alarm setup/Enter override mode/Enter anti-robbery
Wails 3 time, Blinks 3 time
Prior to disabling the alarm, system had been tempered
Quit valet(override) mode
Wails 4 times, Blinks 4 times Door/hood detective point broken/ajar
Wails 5 times, Blinks 5 times Detective point broken/ajar
Blinks 1 time Silent arming/Remote door locking
Blinks 2 times Silent disarming
Wails 30 times, Blinks 30 times Alarm had been triggered and back to normal
Wails 90 times, Blinks 90 times Alarm had been triggered and not back to normal
Wails 10 times, Blinks 10 times Car-searching
19. Specification:
a. Working voltage : DC10.5 ~ 15V
b. Stand-by current : <10mA/12V
c. Working current max. : 20A (actuator 15A, light 5A)
d. Stand-by voltage max. : <=24V
e. Working temp. : -20 ~+60 ℃
f. Working frequency : 434 +/- 1 Mhz
g. Interference Resistance : >=100V/mS
h. Detect range : >30m
i. Life time : 6,0000 times
FCC Certificate Remarks:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired
operation.
NOTICE:
The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is
permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.