Installation & Assembly

2
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Connect the black driver wire to the hot power line wire
with a wire nut.
2A
1
2
3
Install the Fixture
2B
24
Properly place the driver, all wires, and wire nut
connections into the electrical box.
Mount the fixture base onto the threaded studs on the
mounting plate and secure it by tightening the two
knurled nuts.
KNURLED NUT
MOUNTING PLATE
25
THREADED
STUD
3A
2
Push the shade into the fixture base, align the holes on
the shade with the holes on the fixture base, and secure
it in place by screwing in the three Phillips screws.
1
Install the Shade
5
5
FIXTURE
FIXTURE BASE
PHILLIPS SCREW
SHADE
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2015 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVETHESE INSTRUCTIONS!
FIXTURE BASE
2
3
1