Buying Guides

5
LED ILLUMINATED MONORAIL SYSTEM
Step One: Choose your decorative elements
Choose finish of system and make sure all components are specified
as such.
Choose elements (Pendants, Heads and Chandelier Heads) from
decorative elements (pp. 6-11).
Add up total lamp wattage on system, 3 watts for each single
generator, and 6 watts for each dual generator, to confirm wattage
does not exceed transformer capacity.
Step Two: Choose your rail
Measure length of LED Illuminated Monorail run; determine quantity
and length of LED Illuminated Monorail sections required (p. 21).
Specify a length, in feet, of fiber optic cable equal to the run length,
plus one additional foot (p. 48).
Step Three: Choose your LED generators
Use a single generator every 16'.
Use a dual generator for runs over 16' or to change the LED color
mid-run (p. 21).
(BZ) Bronze or (SC) Satin Nickel
Determine item numbers. Specify with an suffix. (pp. 68-173).
Page numbers below reference the Full Line Catalog
For custom bent LED Illuminated Monorail, please provide the
degree and radius of each curve and/or a scaled drawing, by fax, to
the quotes department, for a quotation.