Installation Sheet

4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2017 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
3
4
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Connect the fixture to a suitable ground in accordance
with local electrical codes.
2
5B
2
3
4
5C
Properly place all wires and wire nut connections into
the electrical box.
Secure the mounting plate to the electrical box by
completely screwing in the thumb screws.
5
6
NOTE: Ensure that the shade will slide down to lock
in place.
5D
Align the large openings in the keyhole slots on the
shade to the screws on the back plate and install the
shade onto the backplate.
Lock the shade in place by sliding it over.
7
SHADE
KEYHOLE SLOT
8
SCREW