Installation Sheet

2
Prepare the Fixture for Installation
Remove the six screws on the side of the center housing
in the center of the pan.
Remove the center housing lid.
Remove one knockout and install the provided conduit
connector.
Install the Fixture
2A
1
2
3
KNOCKOUT
LID
3A
Feed the conduit through the conduit connector into
the pan.
Place the four pan holes onto the four back plate
threaded rods.
THREADED
ROD
1
2
1
2
CONDUIT
CONNECTOR
PAN HOLE
POWER
LINE
3B
Mount the pan to the backplate with the provided
washers, lock washers, and nuts.
NUT
3
3
3
3
3
2
3