Installation Sheet

3
3D
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the neutral power line wire to the white fixture
wire with a wire nut.
Connect the hot power line wire to the black fixture
wire with a wire nut.
7
8
9
3E
Replace the lid onto the center of the housing and
tighten the screws.
10
LID
10
3C
Line up each anchor with the center of a backplate hole
and push the anchor in up to the threads.
Screw the anchors the rest of the way in with a
screwdriver.
Secure the backplate to the anchors with the provided
screws and washers .
4
ANCHOR
WASHER
SCREW
ANCHOR
WASHER
SCREW
6
4
5
6
ANCHOR HOLE
ANCHOR HOLE
ANCHOR HOLE
ANCHOR HOLE
8
9
7