Installation Guide

1.8
Installation Instructions for
Belladonna
700BELL_
1
920BDONNA
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
This product must be used with Tech Lighting systems only.
ACCESSORIES
Install The Belladonna Accessory
If the Belladonna shade fits tight onto the fixture, then
carefully bend the grooved shade holder tabs in slightly
with the needlenose pliers. If it fits loose, then carefully
bend the grooved shade holder tabs out slightly with
the needlenose pliers.
GROOVED SHADE
HOLDER TAB
SOCKET HOLES
BELLADONNA SHADE
MR16 LAMP
CAP
GROOVED SHADE
HOLDER
Push the Belladonna shade completely onto the grooved
shade holder.
Insert the MR16 lamp pins completely into the socket
holes.
Push the cap onto the Belladonna shade.
Use MAX 50 Watt, MR16 Front Cover Halogen
Lamp with Belladonna shade.
SAVE THESE INSTRUCTIONS!
1
1A
1B
1
2
3
4
2
3
4
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company