Installation Sheet

1A
Install the Fixture
CANOPY
STEM ASSEMBLY
FIXTURE
N
H
+
-
SCREW
CANOPY
MOUNTING
PLATE
#8-32
SCREW
5
6
7
5
DRIVER
2
1
Remove all the screws.
Remove the mounting plate and driver from the canopy.
Secure the mounting plate to the junction box with the provided #8-32 screws.
Determine the desired height of the fixture using the provided stems and assemble them by screwing them together.
Feed the fixture wires through the stem assembly, then screw the stem assembly to the top of the fixture.
Feed the fixture wires through the canopy support plate and nut, then secure the stem assembly, canopy and support plate
together with the nut by screwing the nut onto the stem assembly.
Connect the blue driver wire to the blue fixture wire with a wire nut.
Connect the red driver wire to the red fixture wire with a wire nut.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white driver wires to the neutral power line wire with a wire nut.
Connect the black driver wires to the hot power line wire with a wire nut.
Neatly place the drivers, all wires, and wire nut connections inside the canopy, align the canopy holes with the mounting plate
holes, and secure the canopy in place by tightening the screws
Screw the glass into the led assembly.
2
3
4
5
6
7
8
9
10
11
12
13
4
SUPPORT
PLATE
NUT
N
H