Specification Sheet

DESCRIPTION

17.5” long, with a 10” high swooping curve. Pivots at head to direct beam.

12 volt, MR16 lamp of up to 75 watts (not included). Chrome finish. See

accessory for maximum wattage usage.

INSTALLATION

Install a DisplayJack canopy or connector ports (sold separately) and

push the DJ-Archie’s arm’s into the canopy or ports. After the show, pull

out DJ-Archie—the canopy or ports stay in place for next time with no need

for an electrician.

ACCESSORIES & OPTICAL CONTROLS

Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt

Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap

Louver Lens Holder, Taza Accessory

WEIGHT

0.23lb / 0.1kg

ORDERING INFORMATION

700DJARCH

FINISH

CHROME

Tech Lighting reserves the right to change specifications for product improvements without notification.

7400 Linder Avenue

Skokie, Illinois 60077

www.techlighting.com

T 847.410.4400

F 847.410.4500

700DJARCH ____

FIXTURE TYPE:

________________________________________________

JOB NAME:

________________________________________________

NOTES:

________________________________________________

DISPLAY & EXHIBIT

DJ-Archie

PAGE 1
D I S P L A Y & E X H I B I T DJ-Archie DESCRIPTION 17.5” long, with a 10” high swooping curve. Pivots at head to direct beam. 12 volt, MR16 lamp of up to 75 watts (not included). Chrome finish. See accessory for maximum wattage usage. INSTALLATION Install a DisplayJack canopy or connector ports (sold separately) and push the DJ-Archie’s arm’s into the canopy or ports. After the show, pull out DJ-Archie—the canopy or ports stay in place for next time with no need for an electrician.