Installation Guide

Installing the Lamp & Shade

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Push the lamp pins all the way into the socket.

WASHER

SOCKET

Unscrew to remove the washer from the socket.

SOCKET

Place the socket into the glass shade.

Slide the glass shade up to expose the socket.

Replace and tighten the washer to the socket.

GLASS

SHADE

WASHER

NOTE: Use only your fingers and a soft cloth to

install or replace the lamp.

Use 12 Volt, 10 Watt Xenon

(Xelogen) bi-pin lamp.

MAX

LAMP

SOCKET

Carefully slide the glass shade down so that it rests on

top of the washer.

To replace the lamp, slide the glass shade up, remove the

old lamp, and repeat steps 5 and 6.

WASHER

GLASS

SHADE

NOTE: If using Cheers accessory (optional-not

included), refer to the instruction provided with the

accessory.