Installation Guide

3
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Installing the Outer Glass & Lamp
Use 50 Watt, Bi-Pin Halogen Lamp.MAX
Lift the glass shade up to expose the socket.
GLASS SHADE
SOCKET
Remove the lamp shield and the old lamp.
BI-PIN LAMP
LAMP SHIELD
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from collecting
on the lamp. This will help extend the life of the lamp.
Gently insert the new lamp into the socket.
THUMB
SCREW
NYLON WASHER
INNER GLASS
OUTER GLASS
STUD
Line up the outer glass holes with the inner glass studs
and secure the outer glass to inner glass with provided
thumb screws and nylon washers.
2A
1
2B
2
1
1
2
3
3
4
5
2C
2D
5