Installation Guide

5
BI-PIN LAMP
LAMP SHIELD
2
3
Replacing the Lamp
Lift the glass shades up to expose the socket.
Remove the lamp shield and the old lamp.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from collecting
on the lamp. This will help extend the life of the lamp.
Gently insert the new lamp into the socket.
SOCKET
INNER
GLASS SHADE
OUTER
GLASS SHADE
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
2A
1
1
2B
2
2C
3
4
4
2D
Use Halogen Bi-Pin Lamp.MAX 50 Watt
Push the lamp shield onto the spring clip.
Lower the glass shade.
5
6
6