Installation Guide

4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
IMPORTANT SAFETY INSTRUCTIONS
– Use this fixture indoors only.
– Do not look directly at the lighted lamp.
– Do not remain in light if skin feels warm.
– Risk of fire: Use only the type of lamp and maximum
wattage indicated in this instruction manual.
– Never cover the halogen lamp with anything other than a
Tech Lighting lamp shield and never place flammable
material close to your fixture.
– Do not touch the fixture shades or lamp shield while the
fixture is on. These surfaces may be HOT.
– To avoid glare in child's eyes, hang the fixture at least 18”
above a table.
To reduce the risk of fire, electrical shock, exposure to
excessive UV radiation, or injury to person:
Halogen Lamp General Information
– It is normal for a new halogen lamp to smoke slightly
on first use. The protective coating is being vaporized.
Prolonging Halogen Lamp Life
– Do not touch the lamp with bare hands. Any contaminant,
even the oil from your hands can deteriorate the lamp.
Handle the lamp with a soft, clean cloth. Rubbing alcohol
can be used to remove any contaminant from the lamp.
– Do not run the lamps at full power when you do
not need to. However, if dimming the fixture for an
extended period of time, occasionally bring the light up to
full brightness for a few minutes to complete the halogen
cycle.