Installation Sheet

2
1A
Install the Fixture
1
Unscrew and remove the fixture screws around the fixture base, then remove the mounting plate.
Secure the mounting plate to the electrical box with the #8-32 screws.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line with a wire nut.
Connect the black fixture wire to the hot power line with a wire nut.
Neatly place all wires and wire nut connections inside the junction box, align the holes on the fixture base with the holes on the
mounting plate, and secure them together using the fixture screws.
Install the lamps by inserting them into the sockets. Refer to the label on the socket for Max Wattage information.
Screw the shades onto the threads on the sockets. Make sure the shade is installed correctly before releasing. Do not over tighten.
2
3
4
5
6
7
8
MOUNTING PLATE
#8-32 SCREW
FIXTURE BASE
SHADE
FIXTURE SCREW
N
H
8
2 2
CAUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture.