Installation Sheet

2
#8-32 SCREW
MOUNTING
PLATE
Secure the mounting plate to the electrical box with 2
#8-32 screws.
1C
3
NOTE: Install the mounting plate so that the studs
are parallel or perpendicular to the walls, this will
ensure that the fixture is oriented to the room.
1D
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
4
5
Mount the fixture base to the ceiling by reinstalling it
onto the mounting plate and secure it tightly with the
knurled nuts.
1E
7
6
1
2A
2A
Install the Shade
Hook the safety cable through the safety brackets
located in the fixture base and back of the shade.
Insert the shade into the fixture base until it is secured
in place against the magnets. Support the shadeNote:
from the outer sides, do not push against the center of
the shade.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2016 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
3
3
6
4
5
MOUNTING
PLATE
KNURLED NUT
7
7
SHADE
FIXTURE BASE
MAGNET
2
SAFETY
BRACKETS
SAFETY
CABLE
1
2