Installation Sheet

Installation Instructions for

920LSDESSAU

1.0

700LSDES48, 700LSDES72

Dessau Linear Suspension

SAVE THESE INSTRUCTIONS!

SUSPENSION

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

Two Person Installation Recommended

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

These fixtures are intended to be installed

utilizing NEC compliant junction boxes.

This product can be dimmed with most ELV or TRIAC dimmers.

This instruction shows a typical installation.

7400 Linder Ave, Skokie, 60077IL

847.410.4400

www.techlighting.com

Visual Comfort Group

PAGE 1
920LSDESSAU Installation Instructions for Dessau Linear Suspension 700LSDES48, 700LSDES72 CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. SUSPENSION Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: Two Person Installation Recommended This product is suitable for damp locations.
PAGE 2
1A 10 11 27 00 7 K 9 30 ANCHOR 00 K 3000K WIRE CONFIGURATION 2 ANCHOR SCREW & WASHER 27 #8-32 SCREW K 30 00 DRIVER K 2700K WIRE CONFIGURATION 27 00 K 3000 K ALLEN WRENCH & ALLEN SCREW 7 00 12 7 1 ALLEN WRENCH & SET SCREW STRAIN RELIEF 6 1 Remove the Allen screws on the sides of the canopy using the provided Allen wrench, then remove the mounting plate from the canopy. 2 Install the mounting plate to the junction box with the two #8-32 screws provided.