Installation Guide

2
ANCHOR
CEILING
Mark the cable post location point 28.5” away from the
center of the canopy.
Tap the anchor at the marked point into the wall up to
the threaded portion with a hammer.
1D
10
11
11
FRONT SURFACE
OF THE ANCHOR
Screw the anchor in the rest of the way with a Phillips
screwdriver.
The arrows on the front surface of the anchor indicate
what direction the toggle will open. Adjust the position
of the anchor by slightly turning it clockwise.
12
13
13
13
1E
#8 SCREW
THREADED WASHER
15
1G
Place all wires properly into the electrical box.
Mount the canopy to the electrical box with two #8-32
screws provided.
8
9
99
Screw the threaded washer onto the anchor with the
long #8 screw.
15
1C 1F
THREADED
WASHER
CABLE POST
Unscrew the threaded washer to separate it from the
cable post.
14
THREADED WASHER
1H
CABLE POST
Tightly screw the cable post back onto the threaded
washer.
16
12