Installation Sheet

Installation Instructions for

920LSVIAG

1.1

700LSVGO

LINEAR SUSPENSION

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

Viaggio Linear Suspension

7400 Linder Ave, Skokie, IL 60077

847.410.4400

www.techlighting.com

a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right

to change specifications for product improvements without notification.

A Generation Brands Company

SAVE THESE INSTRUCTIONS!

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing

NEC compliant junction boxes.

Incandescent version may be dimmed with a standard incandescent

dimmer. LED version may be dimmed with a LED dimmer. Consult

lamp manufacturer for additional information.

This product is suitable for damp locations.

This instruction shows a typical installation.

Two Person Installation Recommended

PAGE 1
920LSVIAG Installation Instructions for Viaggio Linear Suspension 700LSVGO LINEAR SUSPENSION GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. Incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information. This product is suitable for damp locations.
PAGE 2
1A DRYWALL ANCHOR MOUNTING PLATE 9 4 4 1 ALLEN WRENCH 1 2 5 2 11 10 5 DRYWALL ANCHOR SCREW ALLEN SCREW CANOPY 8 HEX NUT GLASS SHADE 13 8 PIVOT STEM ASSEMBLY 6 SOCKET 14 LAMP FIXTURE 6 7 C AUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture. 1 Remove the Allen screws on the sides of the canopy using the provided Allen wrench, then remove the mounting plate from the canopy.