Installation Sheet

1.7
Installation Instructions for
Flexible Connectors
700MOCFXH_
1
920MOFLXH
GENERAL PRODUCT INFORMATION:
This product is suitable for indoor dry locations only.
This product must be used with Tech Lighting MonoRail
system only.
These conductive connectors join two sections of the
MonoRail end to end at desired sharp horizontal angle.
CONNECTORS
Install the Flexible Connectors
Bend the two flexible connectors so that the button
head screws are exposed toward outside of the bend.
BUTTON
HEAD SCREW
Push the two MonoRail sections completely onto the
flexible connectors.
ONE MONORAIL
SECTION
OTHER MONORAIL
SECTION
FLEXIBLE
CONNECTOR
1/16 ALLEN WRENCH
#6-32 SET
SCREW
1
1A
1
1B
2
1C
2
2
3
3
Tighten all four #6-32 set screws with the 1/16 Allen
wrench. To avoid heat build up and corrosion, make sure
all set screw connections are tight.