Manualshelf

Installation Guide

ManualsBrandsTech Lighting ManualsPendantsTech Lighting MonoRail Otto Clear Hand-Etched Mouth Blown Transparent Glass Pendant - 12v Halogen
1234
3
Replacing the Lamp
CAUTION: To reduce the risk of a burn or electric
shock when replacing the lamp, disconnect the
power to the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Lift the glass shade up to expose the socket.
SOCKET
Remove the lamp shield and the old lamp.
BI-PIN LAMP
LAMP SHIELD
2A
1
1
2B
2
2
2C
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from
collecting on the lamp. This will help extend the life of
the lamp.
Gently insert the new lamp into the socket.
Use Bi-Pin Halogen Lamp.MAX 50 Watt
3
4
Push the lamp shield onto the spring clip.
Lower the glass shade onto the socket assembly.
4
2D
5
6
5