Specification Sheet
DESCRIPTION
A direct-end power feed brings power from a remote transformer to the rail
at an end of the run and mounts to a wall perpendicular to the run. The
low-voltage leads from the remote transformer are connected to the
canopy leads inside the junction box.
INSTALLATION
This product can mount to either a 4" square electrical box with round
plaster ring or an octagon electrical box (not included).
OTHER INFORMATION
For use with a single-feed remote transformer (sold separately.)
WEIGHT
0.93lb / 0.42kg
ORDERING INFORMATION
700MOP4CD
FINISH
Z
ANTIQUE BRONZE
C
CHROME
S
SATIN NICKEL
©2011 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
7400 Linder Avenue
Skokie, Illinois 60077
www.techlighting.com
T 847.410.4400
F 847.410.4500
700MOP4CD ____
FIXTURE TYPE:
________________________________________________
JOB NAME:
________________________________________________
NOTES:
________________________________________________
________________________________________________
________________________________________________
MONORAIL
MonoRail 4" Round Direct-End Power Feed