Installation Guide

3
Replacing the Lamp
Move the fixture metal shade up to expose the socket.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
METAL SHADE
SOCKET
MR16 LAMP
2A
1
1
Use 50 Watt, MR16 Front Cover Halogen
Lamp.
MAX
Remove the old lamp.
Push the new lamp pins completely into the socket.
Lower the metal shade back on top of the socket
assembly.
MR16 LAMP
SOCKET
2
3
4
2B
2
3
4