Specification Sheet

Rigid Standoff
700MOS ________ ________
ORDERING INFORMATION
MONORAIL
mo_rigid_standoff_spec.pdf
FIXTURE TYPE: _________________________________________
JOB NAME: _____________________________________________
DESCRIPTION
The field-cuttable rigid standoff is recommended for curvy
runs or runs with heavier Heads, Pendants or Functional art,
such as glass pendants. Rigid standoffs are compatible with
various power feed options: Use the chart below to determine
the appropriate standoff for your run.
FINISH
Antique bronze, chrome, satin nickel.
WEIGHT
0.25-2.55 lb./0.11-1.16 kg. ±
COMPATIBLE STANDOFF
700MOS LENGTH (A) FINISH
02 2" (1.9") Z ANTIQUE BRONZE
03 3" (3.6") C CHROME
04 4" (4.8") S SATIN NICKEL
05 5" (5.8")
06 6"
12 12"
24 24"
36 36"
48 48"
96 96"
LENGTH USED WITH
2" (1.9")* - Remote transformer with canopy
- Flush transformer 60w
- Recessed can transformer
3" (3.6")* - Surface transformer 60w, 75w, 100w, 150w
- Canopy with 3" power extender
4" (4.8")* - Surface transformer 300w
5" (5.8")* - Surface transformer 600w
6"* - Canopy with 6" power extender
12"* - Canopy with 12" power extender
24"* - Canopy with 24" power extender
36"* - Canopy with 36" power extender
48"* - Canopy with 48" power extender
96"* - Canopy with 96" power extender
*Actual length from ceiling to top of rail.
*Actual length from ceiling to top of rail.
A
0.7”
17 mm
0.8"
20 mm
Shown approximately 15% actual size.
7400 Linder Avenue T 847.410.4400
Skokie, Illinois 60077 F 847.410.4500
www.techlighting.com
© 2009 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.